Mixing Valves
Overview
Kirkco understands the importance of precision when processing multi-component materials. Different systems are required for different materials. There are three mixing systems available to process variances in viscosity, mixture properties, short pot life, etc.
System Options
Equipment options
Dyna Static
Difficult to mix materials, use Dynamic Static Mixers. The dynamic static mixers are a combination of a dispensing valve and a drive motor. The motor rotates the mixer element in the plastic tube. The drive is either pneumatic or electric. Static-dynamic mixers run without flushing agents because the components are supplied to the mixer tube intake separately Mixing of the two components shall be done with a dynamic static mixer. This unit is specifically designed for materials where additional shear needs to be introduced to ensure thorough mixing. The two components remain separate until entering the mixer. Only then does homogeneous mixing of the two components take place. The mixer is fastened to the gun and remains stationary. As the material is dispensed, the mixing element inside the mixer rotates at a high speed, thoroughly mixing and blending the materials. (Solvent/material purge optional but not required with disposable mixers)
Dynamic Static Mixers
The most difficult to mix materials use true Dynamic Mixers. Dynamic mixers can mix materials with an extremely short pot life, widely differing viscosities and mixing ratios. The mixing rotor in the central chamber mixes the components evenly within a very short time. The mixer head can be operated either cooled or heated. The mixer motor drives are either pneumatic or electric. Welcome to the forefront of metering and mixing technology – your ultimate partner in the precise processing and application of single and multi-component adhesives and sealants. Our cutting-edge eMotionMix system offers a comprehensive solution, seamlessly integrating dynamic mixing heads, automation, and materials for unparalleled perfection and reliability.
High Pressure Impingement Mixing Valve
Impingement Mixing Valves for Urethane Foam & Elastomer: Enhancing Productivity
