.gif){kind=spacer}
.jpg)
.gif){kind=small}
Graco Therm-O-Flow Piston Pumps
View Product Catalog: Search for Graco Therm-O-Flow Piston Pumps by detailed specifications, compare products side-by-side and more..gif)
Handles any material, anytime!
Designed to handle hot melt adhesives and sealants of all viscosities and abrasiveness, the Therm-O-Flow® hot melt systems from Graco and Kirkco outperform the competition time after time. They easily integrate into any system, require little maintenance and are one of the most durable bulk hot melt drum unloaders on the market.
Click on a link below to learn more about Graco Therm-O-Flow Piston Pumps.
- Benefits
- TOF 55
- Motor Module Selection
- Heated Platen Selection
- Drum Ram Style Selection
- Heat Control Selection - Supply Voltage
- Drum Unloader Options Selection
- Crossover Control Selection
- Therm-O-Flow Plus Technical Specifications
- Instruction Manuals
- Power Requirements
Benefits:
The Solution for all of your Hot Melt Applications
- High-output per cycle reduces pump wear for longer life and low maintenance costs
- Easy-to-change packing seals reduce downtime
- Fluid pump section is Severe Duty® construction for extended life in abrasive materials
- Extra-long life pump-rod packings prevent leaks
- Exceptional performance with a wide range of materials at almost any viscosity
- Quick and easy programming of temperature controls
Materials Processed:
- Butyl Rubber
- Ethylene Vinyl Acetate (EVA)
- Polyamide
- Polyurethane Reactive (PUR)
- Pressure Sensitive Adhesives (PSA)
- Polyisobutylene (PIB)
- Warm Melt Sealers
Industries Used:
- Insulated Glass
- Automotive Interiors
- RV Lamination
- Window Manufacturing
- Cable Manufacturing
- Furniture Assembly
- Door Lamination
- Bookbinding
- Tape and Label Manufacturing
- Transferring Hot Melt Adhesives
Custom-Configured Solutions
Graco’s Therm-O-Flow products are custom-designed to handle all of your hot melt applications. Kirkco will help you select the specific air motor, platen, heat zone controls, hose/gun kits and accessories you need for your specific application.
The material type and usage rate determine the ideal pumping unit needed to complete your system. The air motor delivers the required power ratio of fluid pressure out to air pressure in. Depending on the application, choose either a 19:1 Senator®, 31:1 Bulldog® or 65:1 King® air motor.
Kirkco will help you choose options to build the system best suited to meet your individual needs. Contact us today for a Hot Melt Configurator Form (#684052) or consult with one of our Sealant and Adhesive Equipment specialists for more information.
.jpg)
TOF 55
Features and Benefits
- New fluid pump section with Severe-Duty™ construction for extended life
- Latest-technology seals and extra-long life pump-rod packings prevent leaks
- Large 6.5 in. (165 mm) ram cylinders increase pump loading and flow rate capability by 40%
- High-output per cycle reduces wear for longer life and fewer repair costs
- Floating-piston seal and flow-through priming plate improve pump loading of high viscosity materials
- Optional MegaFlo™ high melt-rate platen also reduces material loss
Typical Applications
- Feeding automatic and robotic applicators directly from fiber or steel drum (extruding, streaming, coating).
- Dispensing heated sealants and adhesives to one or more manual operator dispensing stations(sealing, product assembly).
- Transferring raw materials in the formulation of hot melt products
- Transferring materials for filling drums, pails, caulking tubes or chubs
Typical Fluids Handled
- Butyl rubber
- Ethylene vinyl acetate (EVA)
- Polyamide
- Polyurethane reactive (PUR)
- Pressure sensitive adhesives (PSA)
- Polyisobutylene (PIB)
- Warm melt sealers
Selecting a Therm-O-Flow Plus System:
Based on your application needs, we will choose options to build the system best suited to your needs. Descriptions of the various options follow:
Motor Module Selection
The material type and usage rate determine the ideal pump for the complete system. The air motor delivers the required power ratio of fluid pressure out to air pressure in. Depending on the application, you will need either a 19:1 Senator, 31:1 Bulldog or 65:1 King air motor. Each of these motors is also available with a Quiet Air Motor option.
Senator 19:1
The 19:1 Senator is used with materials that have the following requirements: relatively low viscosities of up to 50,000 cps, low flow rates of up to 5 lbs (2.3 kg) per minute, short hose lengths of up to 15 ft. (4.5 m) and fluid pressures of up to 1500 psi (103 bar; 10.3 MPa).
Bulldog 31:1
The 31:1 Bulldog is ideal for materials that have a low- to medium- viscosity of up to 200,000 cps, medium flow rates between 5-10 lbs (2.3 to 4.5 kg) per minute, hose lengths of up to 25 ft. (7.6 m) and fluid pressures of up to 2500 psi (172 bar; 17.2 MPa).
King 65:1
The 65:1 King is used with materials that have a medium- to high-viscosity of up to 2 M cps, high flow rates at a minimum of 8 lbs (3.6 kg) per minute and long hose lengths of 20 ft. (6 m) and more. This motor is best when fluid pressures of up to 4000 psi (276 bar; 27.6 MPa) are required.Heated Platen Selection
.jpg)
The application’s flow rates and the material used are the main considerations for selecting the heated platen. The heated platen is available in three styles: the standard fin design, the MegaFlo™ plate and the smooth bottom plate.
Standard Fin Design
The standard fin design is recommended for normal flow rates and for warm and hot-melt materials.
MegaFlo Plate (US Patent No. 6,076,705)
For most applications, the MegaFlo plate is the platen of choice. The MegaFlo plate increases the heat transfer of warm- and hot-melt materials and allows higher flow rates of the melted material. The convex design of the plate reduces the amount of material left on the bottom of the container. This plate is also preferred for low flow rates when heat history or charring of the material is a concern.
Smooth Bottom
The smooth bottom plate is designed for use with materials that need to be cleaned often or don’t need to be melted before pumping. This plate delivers low melt rates when used with hot-melt materials, but may also be suitable for warm melt materials.
Drum Ram Style Selection
The heated platen style and the material used are the main considerations for selecting the drum ram style. Therm-O-Flow Plus is available with either a pneumatic ram or a hydraulic ram assembly. Both are mounted on 6.5 in. (165 mm) cylinders.
Pneumatic 6.5 in. (165 mm) Ram Assembly
The pneumatic ram is the standard assembly for Therm-O-Flow Plus units outfitted with the MegaFlo platen. This ram is compatible with most hot- and warm-melt materials.
Hydraulic 6.5 in. (165 mm) Ram Assembly
The hydraulic ram is the ideal choice for applications that use high-viscosity materials requiring higher flow rates. This ram has a higher downward force on the material than the pneumatic ram. The increased feed pressure in the drum allows some materials to be pumped at a higher flow rate. The added ram pressure is especially useful for materials which are high viscosity, but don’t need to completely liquefy before being pumped.Heat Control Selection — Supply Voltage
Choose the heat control that uses the voltage compatible with the power available at the installation site.
Heat Control Selection — Number of Heat Controls
The Therm-O-Flow Plus can be ordered with six or eight heat zones. Zones 1 and 2 are always used for the heated drum platen and the heated pump. Zones 3 and 4, 5 and 6, and optional zones 7 and 8, are available as paired zones through a 16-pin connector. The heated hoses have a 16-pin connector on the inlet end cable and an 8-pin connector on the outlet end cable. All heated valves, manifolds and heaters are equipped with an 8-pin matching connector. Accessory cables are available for other possible combinations.Supply voltage Full-load amps Standard platen MegaFlo platen
220/240 VAC 70 amps 80 amps
380/400 VAC 42 amps 48 amps
470/490 VAC 35 amps 40 amps
570/590 VAC 29 amps 32 amps
Based on 8-heating zones.
Drum Unloader Options Selection
Advanced Pendant Control with 7-Day Timer for Preheating
A communication pendant that plugs into the main control box can be set to turn on (preheat) and turn off at specific times for each day of the week. The pendant also allows you to easily set parameters for all heat zones including the set point, alarms, PID values and individual zone on/off control.
Low-Level Kit
An adjustable limit switch is mounted to the drum ram. The switch lights a warning beacon mounted over the unit when the drum level gets low. Contact terminals are also available in the control box for user interface.Pump Inactivity Kit
A proximity switch is mounted on the pump to sense movement. A timer is included in the control box. If the unit hasn’t been used in the pre-set period of time, the heating circuits will automatically turn off.
Vent Hood Kit
The vent hood kit is a shroud mounted to the rear of the ram assembly. This shroud extracts fumes from the hot fluid that may be present when changing drums. (Note: Required exhaust tubing and exhaust fan not included.)
Drum Clam Shell
This option is a steel shell that clamps around the outside of fiber drums reinforcing the drums for use on the drum ram.Heavy-Duty Drum Clamp
The heavy-duty drum clamp is a 4 in. (101 mm) heavy, steel-hinged band-clamp that centers, supports and holds the drum during the removal of the ram platen from the drum.(Note: Not recommended for fiber drums.)
Ram Post Saddle-Type Drum Clamps
These are swivel-type drum clamps that enter the drum when it is slid into place. This option also assists in drum hold-down with chimed drums.Crossover Control Selection
Dual Unloader Crossover Control automatically switches operation of one pump to a second pump. Includes low level switches, lights and control for preheat and automatic drum changeover; 230 volt AC.
Do not order Pendant or Low Level Kit when choosing auto crossover control. They are included with this option.
.gif){kind=small}