| Part No.: | Micro Mix K
|
| Description: | The MICRO-MIX K is a pneumatic or servo driven, solvent free piston pump type rod metering and mixing system, used to handle low to medium viscosity multi component media such as polyurethanes, silicones or epoxy resins. Suitable for the smallest sizes when configured with micro metering valve. A variety of options are available to configure a MICRO-MIX K system to meet your precise manufacturing application. One of our application engineers would be pleased to assist with complete system configuration.
|
| Manufacturer: | Dopag
|
| Item: | Micro Mix K
|
| Brand: | Micro Mix
|
| System: | System
|
| Product Group: | Two Component Meter Mix System
|
| Product Type: | Metering and Proportioning Unit
|
| Subcategory: | Rod Metering Proportioning Unit for Small Shot Applications
|
| Additional Category: | - Sealant & Adhesive
- Plural Component
- Piston
- Rod Metering
- Front Loading
- Shot Metering
|
| Type Of Application: | - VACUUM ENCAPSULATION
- DOMING
- DISPENSING
- AUTOMATION
- BONDING
- SYRINGE FILLING
- GASKETING
- SEALING
- POTTING
- GLUING
- ENCAPSULATING
|
| Material Characteristics: | - Unfilled
- Filled
- Abrasive
- Moisture Sensitive
|
| Material Types: | - EPOXIES
- URETHANES
- SILICONES
- ACRYLICS
- OTHERS
|
| Optional Components: | - Static-dynamic mixing system - with mixer element monitoring
- Dynamic mixing system
- Adjustable output rate
- Material filter
- Mixing ratio control
- Volume counter
- Start/Stop signal with foot switch
- Bypass
- Manual handle and trigger start/stop fixed to twin snuffer valve
- Material pressure regulator
- Heating
- Pressure vessel with- level control- agitator- automatic refill
- Material supply through drum pumps for high viscosity media
|
| Max Displacement Gpm Lpm: | 1 to over 60 cycles per minute,depending on the length of the stroke, size ofrod metering pumps, material viscosity, mixer, outletneedle employed and any back pressure or flowlimitations created by the product into whichmaterial is being dispensed
|
| Additional Options: | - Material Feed System
- Accessories such as heaters
- level controls
- agitators
- follower plates
- vacuum degassing
- nitrogen blanketing
- etc. are available.
- Mixers - Disposable Plastic Static mixers are availablein sizes from 1/8" to 1/2" in diameter and in variable lengths
- Disposable Needles and Pinch Tubing
- Machine Drives - Air cylinder drives are provided standard with an option to adapt electric stepper or servo motors and linear actuators.
- Machine Controls - pneumatic/electriccontrol panel with an operator interface
|
| Drive: | Pneumatic,Servo,Stepper
|
| Features: | - Variable mixing ratio
- Variable output rate
- Handling of unfilled
- filled as well asabrasive media
- Exact reproducibility ofmetering operation
- Highly accurate mixing ratio andoutput rate through ratio checkadapter
- Pneumatic-mechanical control
- Solvent free
|
| Other Options: | - Material supply by drum pumps
- Abrasion protected components
- Heating
- Ratio check adapter
|
| Pump Style: | - Postive Displacement Rod Proportioning
- Piston Metering Pump
|
| Pump Type: | Rod Piston Pump
|
| Pump Type And Size: | 2 -10
|
| Stainless Version: | Optional
|
| Accessories: | - Pressure vessel
- Piston pumps
- Air motor
- Lever system
- Static mixing system- Twin snuffer valve- Disposable static mixer
- Pneumatic-mechanical control
- Material supply by drum pumps
- Abrasion protected components
- Heating
- Ratio check adapter
|
| Air Operating Range: | 6 bar
|
| Application Valve: | - Twin Snuffer Valve
- Dyna-Static
- Dynamic
|
| Configuration: | Use the Request Information Button to Configure a Unit
|
.gif){kind=spacer}
.jpg)
.gif){kind=small}
.gif){kind=small}