| Part No.: | Visco-Mix P80
|
| Description: | The VISCO-MIX P80 is a hydraulically poweredtwo component\ high quality metering andmixing system suitable for processing mediumto high viscosity materials at an variable mixingratio.Particularly suitable for sealing and bondingapplications in the transport and insulated glassindustries that require a continuous materialsupply.The material supply with the base component ispumped directly from standard 80 litre sizedrums. The hardener is fed directly from 30 litresize drums or by pressure vessel.
|
| Manufacturer: | Dopag
|
| Item: | VISCO-MIX P80
|
| Brand: | Visco-Mix
|
| System: | System
|
| Product Group: | Two Component Meter Mix System
|
| Product Type: | Metering and Proportioning Unit
|
| Subcategory: | Two and Multi Component Piston Pump Proportioning Systems and Metering Pumps
|
| Additional Category: | - Sealant & Adhesive
- Plural Component
- Piston Metering
|
| Type Of Application: | - Fenestration
- Insulated glass sealant
- Aerospace sealants
- Curtain wall structural sealant
|
| Material Characteristics: | - High Viscosity Base
- Low Viscosity Catalyst
|
| Material Types: | - Urethane
- Silicone
- Polysulfide
|
| Optional Components: | Moisture Barrier Hoses available for silicones and urethanes
|
| Additional Options: | - Low Material Level Monitoring
- PLC Control Unit
|
| Air Inlet Size Nptm: | 1/2” BSP
|
| Air Motor: | depending on the viscosity
|
| Air Requirements: | consumption 300 l/min
|
| Drive: | Pneumatic
|
| Drum Ram Style: | Double Post Pneumatic Ram
|
| Features: | - Compact size
- Variable mixing ratio
- Plastic mixer
- Solvent free
- High pressure ratio for high viscosity media
|
| Fluid Inlet: | Fluid inlet base 15 gal (80 liter) ram plate/priming piston pump Fluid inlet catalyst 3/4 npt(f)
|
| Fluid Outlet Size: | Fluid outlet base 1 npt(f) Fluid outlet catalyst 1/4 npt(f)
|
| Other Accessories: | Boom or Extended Hose Supply Kit: for the process that requires an extended reach
|
| Other Options: | - All Visco-Mix Systems are standard with safety features to prevent problems that come with dispensing materials at high fluid pressures. Components are designed for high durability and low-cost of ownership
- for years of reliable service.
|
| Package: | Silicone\Urethane\Polysulfide
|
| Pump Style: | priming piston pump
|
| Pump Type: | P80
|
| Repair Kit: | Available
|
| Stainless Version: | Available
|
| Type: | several configuration options\ depending on the material chemistry\ the volumetricratio of base and catalyst\ and the best type of mixing suitable for the material.
|
| Accessories: | Custom Configuration and Modifications Available
|
| Additional Hoses: | - Custom Hose Extension for silicone
- urethane
- polysulfide
|
| Application Valve: | Two Component Twin Snuffer Valve\Base Purge Handgun\Mixblock
|
| Basic Dispenser: | Choose based on material being processed
|
| Bypass Manual: | Standard
|
| Configuration: | Silicone\Urethane\Polysulfide
|
| Dehumidifier: | desiccant air dryer standard
|
| Dispense Hose: | Resin Hose Synthitic Rubber Moisture Lock\Catalyst Hose Teflon Core Stainless Steel Braid
|
| Dispensing System 1: | Plastic Disposable Static Mixer for lower material waste and easier clean-up
|
| Dispensing System 2: | Base Purge Flexible or Tri-Core Mixer for a lighter handling weight
|
.gif){kind=spacer}
.jpg)
.gif){kind=small}
.gif){kind=small}