Component

SubCategories

• Accessories
• Hot Melt Adhesive
• Single Component
• Spraying and Coating Technology
• Two Component Meter Mix System

Products

109161
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/8" (9.52 mm) ID, 2' (0.61 m)long
109162
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/8" (9.52 mm) ID, 4' (1.22 m) long
109163
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/8" (9.52 mm) ID, 6' (1.83 m) long
116760
Dispense, 0.50"(1.27 mm) ID x 6', (1.83 m), Neoprene core, 4000 psi, (276 bar, 27.6 MPa) high flex, abrasion resistant for robots
116761
Dispense, 0.50" (1.27 mm) ID x 10', (3.05 m), Neoprene core, 4000 psi, (276 bar, 27.6 MPa) high flex, abrasion resistant for robots
116762
Dispense, 0.62" (1.57 mm)ID x 6', (1.83 m), Neoprene core, 3625 psi, (250 bar, 25.0 MPa) high flex, abrasion resistant for robots
116763
Dispense, 0.62" (1.57 mm) ID x 10', (3.05 m), Neoprene core, 3625 psi, (250 bar, 25.0 MPa) high flex, abrasion resistant for robots
215238
Hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 10' (3.05 m) long
215239
Hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 15' (4.57 m) long
215240
Hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 25' (7.62 m) long
215241
Hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 6' (1.83 m) long
215441
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 10' (3.05 m) long
215443
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 25' (7.62 m) long
215444
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 50' (15.24 m) long
215445
Hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 5' (4.52 m) long
233731
Co-axial feed, 1.0" (25.4 mm)ID x 20', (3.03 m), synthetic rubber, 5000 psi (345 bar, 34.5 Mpa)
626720
Dried hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 5' (4.52 m) long, dried, capped with desiccant
626721
Dried hose, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 10' (12.7 mm) long, dried, capped with desiccant
626722
Dried hose e, Buna-N core and cover, 5000 psi, (345 bar, 34.5 MPa) 1/2" (12.7 mm) ID, 25' (7.62 m) long, dried, capped with desiccant
626723
Dried hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 6' (1.83 m) long, dried, capped with desiccant
626724
Dried hose, Neoprene core and cover, 5000 psi, (345 bar, 34.5 MPa) 3/4" (19.05 mm) ID, 10' (3.05 m) long, dried, capped with desiccant
626725
Dried hose, Neoprene core and cover, 5000 psi, c3/4" (19.05 mm) ID, 15' (4.57 m) long, dried, capped with desiccant
626726
Dried hose, Neoprene core and cover, 5000 psi, (4.57 m) 3/4" (19.05 mm) ID, 25' (7.62 m) long, dried, capped with desiccant
C12218
Feed, 1.0" (25.4 mm) ID x 20', (3.03 m), Neoprene core, 5000 psi (345 bar, 34.5 MPa)
C12383
Feed, 1.0" (25.4 mm) ID x 10', (3.05 mm), Neoprene core, 5000 psi (345 bar, 34.5 MPa)
366110
High Pressure Piston Pump Wildcat 18-40
366111
High Pressure Piston Pump Wildcat 18-40
366105
High Pressure Piston Pump Wildcat 18-40
366106
High Pressure Piston Pump Wildcat 18-40
366112
High Pressure Piston Pump Wildcat 10-70
366113
High Pressure Piston Pump Wildcat 10-70
243482
1K Ultra-Lite valve, 45o outlet for orbiter
243666
1K Ultra-Lite valve
965766
1K Ultra-Lite valve, machine mount, Stainless SteelT wetted parts
965786
1K Ultra-Lite valve, machine mount, Aluminum wetted parts
241658
Orbital Applicator Module Kit (wide pattern)Swirl orbiter (243403), motor cable (617870),extension motor cable (233123), control panel(918616) and Robot Interface Cable Assembly(617829)
234029
Orbital Applicator Module (narrow pattern)Swirl orbiter (243402), motor cable (617870),extension motor cable (233123), control panel(918616) and Robot Interface Cable Assembly(617829)
918616
PrecisionSwirl Control AssemblyBare model only. Order appropriate cables toconnect to dispenser.
Cobra
Diaphragm pump Cobra 40-10 USA
400.07.73
Twin-Snuffer valve, (for Mixer 27.06.107) with Spray air Adaptor (manual)
400.07.75
Twin-Snuffer valve, (for Mixer 27.06.108/109) with Spray air Adaptor (manual)
400.07.70
Twin-Snuffer valve, Double Step Seal, (for spraying)
400.07.50
Twin-Snuffer valve, V-Packing, (for spraying)
400.07.72
Twin-Snuffer valve, (for Mixer 27.06.107) with Spray air Adaptor (automatic)
400.07.74
Twin-Snuffer valve, (for Mixer 27.06.108/109) with Spray air Adaptor (automatic)
400.07.52
Twin-Snuffer valve, V-Packing(for Mixer 27.06.108/109) with Spray air Adaptor (automatic)
400.07.53
Twin-Snuffer valve, V-Packing(for Mixer 27.06.110) with Spray air Adaptor (automatic)
400.07.76
Twin-Snuffer valve, with Air Purge (automatic)
401.07.81
Twin-Snuffer valve, with Air/Solvent Purge, V-Packing, (automatic)
401.07.76
Twin-Snuffer valve, with Air/Solvent Purge stainless (automatic)
401.07.85
Twin-Snuffer valve, with 2xAir/Solvent Purge, V-Packing, (automatic)
401.07.90
Twin-Snuffer valve, with 3xAir/Solvent Purge, V-Packing, (automatic)
V 40 121 30 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 40 121 60 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4012160013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 221 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 221 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4422160112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 221 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 221 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4422160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 271 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4427160012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 271 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4427160112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 271 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4427160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 271 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4427160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 021 30 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4402130013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 021 60 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4402160013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 321 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 321 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4432160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 321 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4432160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 231 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 231 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 231 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4423160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 281 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4428160012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 281 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4428160112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 281 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4428160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 281 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4428160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 131 30 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4413130013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 131 60 013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4413160013
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 40 251 40 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 40 251 40 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4025140112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 40 251 40 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 40 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 40 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4424140112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 40 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4424140212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 40 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4424140312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 241 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4424160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 30 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425130012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 30 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425130112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 30 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425130312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 30 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425160012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425160112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 251 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4425160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 211 40 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4421140012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 211 40 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4421140112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 211 40 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4421140212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 211 40 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4421140312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 20 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426120012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 20 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426120112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 20 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426120212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 20 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426120312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426160012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 60 112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426160112
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 60 212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426160212
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 44 261 60 312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4426160312
Material pressure tank that meet the highest demands in terms of quality and product safety.
V4012130013
MDG 1-pressure vessel, 3 bar,
401.07.82
Twin-Snuffer valve, V-Packing, (for blowing air), stainless
367104
Low Pressure Piston Pump Pump 8-300
367108
Low Pressure Piston Pump Puma 3-600
367103
High Pressure Piston Pump Puma 28-40 NPS
367105
High Pressure Piston Pump Puma 28-40 NPS
367119
High Pressure Piston Pump Puma 28-40 PE/TG ESS
367106
High Pressure Piston Pump Puma 15-70 NPS
367107
High Pressure Piston Pump Puma 15-70 NPS
368114
High Pressure Piston Pump Puma 15-150 NPS
368115
High Pressure Piston Pump Puma 15-150 NPS
236158
High Pressure Supply Tank
236157
High Pressure Supply Tank
236152
High Pressure Supply Tank
236149
High Pressure Supply Tank
236153
High Pressure Supply Tank
236150
High Pressure Supply Tank
236154
High Pressure Supply Tank
236151
High Pressure Supply Tank
PILOT WA 500-2K
Spray guns for 2-component dispersion adhesives
V2456000003
Spray guns for 2-component dispersion adhesives

Cobra 2-K - on frame
367102
Wagner KolbenPump Puma 15-70 USA
347001
Gun G 15 (replaced by 347002)
400.17.00
Twin Valve Compact ID 6mm (until 11.2008 Technical Data)
400.17.01
Twin Valve Compact ID 6mm (until 11.2008 Technical Data)
400.17.03
Twin Valve Compact ID 6mm (until 11.2008 Technical Data)
400.17.04
Twin Valve Compact ID 6mm (until 11.2008 Technical Data)
BF0221M__D2S
1 Nozzle Bead
MDG500
Material pressure tank that meet the highest demands in terms of quality and product safety.
246687
Mastic regulator, air operator, with transducer ports for ambient fluid plates
246688
Mastic regulator, air operator, for heated fluid plates
234170
Fluid Plate, Ambient Mastic Regulator with No Flow Meter
234169
Fluid Plate, Ambient Mastic Regulator with Helical Flow Meter
234196
Fluid Plate, Ambient Mastic Regulator with High Resolution Helical Flow Meter
234193
Fluid Plate, Heated Mastic Regulator with No Flow Meter
234194
Fluid Plate, Heated Mastic Regulator with Helical Flow Meter
368024
High Pressure Piston Pump Leopard 48-110 PE/T
368025
High Pressure Piston Pump Leopard 48-110 PE/L
368108
Low Pressure Piston Pump
368111
Low Pressure Piston Pump Leopard 4-1200
368103
High Pressure Piston Pump Leoard 35-70 NPS
368105
High Pressure Piston Pump Leoard 35-70 NPS
368123
High Pressure Piston Pump Leopard 35-70 NPS
368125
High Pressure Piston Pump Leopard 35-70 with ram NPS
368106
High Pressure Piston Pump Leoard 35-70 NPS
368107
High Pressure Piston Pump Leoard 35-70 NPS
368109
High Pressure Piston Pump Leopard 35-150 NPS
368116
High Pressure Piston Pump Leopard 18-300 PE/T
368117
High Pressure Piston Pump 18-300 PE/L
244343
Mass flow meter kit, non-intrusive
BF0441WD2S
Swirl, 1 Nozzle Bead
BF0441ED2S
Electric Operated, 1 Nozzle, Bead
BF0441BD2S
1 Nozzle Bead.
109896
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
246190
Helical Meter (HG6000) with sensor: Flow meter, ambient helical, w/ sensor
246652
Helical Meter (HG6000HR) high resolution; Flow meter, high resolution helical, w/ sensor
115876
Dispense, 240 volt electric heat, 0.5" (1.27 mm) x 10', (3.05 m) Teflon core
115880
Dispense, 240 volt electric heat, 0.62" (15.75 mm) x 10', (3.05 m) Teflon core
115887
Feed, 240 volt electric heat, 0.87" (22.10 mm) x 20', (6.1 m) Teflon core
115903
Dispense, 240 volt electric heat, 0.62" (15.75 mm) x 6'(1.83 m), Teflon core
353861
Spray gun GM 2900EAW (7.5m), Manual Electrostatic Spray Gun with Air Atomization, Nonlmmable Materials Only
179014
Manual Electrostatic Spray Gun with AirCoat Atomization, Spray gun GM 2000 EACF EN (11 m~36' cable) (Part of: 0292 017)
179013
Manual Electrostatic Spray Gun with AirCoat Atomization, Spray gun GM 2000 EACR EN (11 m~36' cable) (Part of: 0292 017)
179028
Spray gun GM2000 EACR USA
364007
Manual AirCoat Spray Gun without Electrostatic
364003
Manual AirCoat Spray Gun without Electrostatic
364008
Manual AirCoat Spray Gun without Electrostatic
364018
Manual AirCoat Spray Gun without Electrostatic
364004
Manual AirCoat Spray Gun without Electrostatic
364005
Manual AirCoat Spray Gun without Electrostatic
364001
Manual AirCoat Spray Gun without Electrostatic
364006
Manual AirCoat Spray Gun without Electrostatic
364016
Manual AirCoat Spray Gun without Electrostatic
364002
Manual AirCoat Spray Gun without Electrostatic
364020
Manual AirCoat Spray Gun without Electrostatic for High Temperatures

Automatic Electrostatic Spray Gun with AirCoat Atomization, Nonlmmable Materials Only
380010
Automatic AirCoat Spray Gun, External Control
350046
Automatic Electrostatic Spray Gun with Air Atomization
350028
Automatic Electrostatic Spray Gun with Air Atomization
350033
Automatic Airless Spray Gun without Electrostatic
350032
Automatic Airless Spray Gun without Electrostatic
350044
Automatic Electrostatic Spray Gun with AirCoat Atomization Fan Spray
350070
Automatic Electrostatic Spray Gun with AirCoat Atomization Fan Spray
350071
Automatic Electrostatic Spray Gun with AirCoat Atomization Round Spray
350003
Automatic Electrostatic Spray Gun with AirCoat Atomization Fan Spray
380019
Automatic AirCoat Spray Gun, External Control, Robot
961635
Mastic regulator, air operator (no transducer ports)
903958
Mastic regulator, spring operator (no transducer ports)
918625
Compact Dispense Valve, Spray
918623
Compact Dispense Valve, Extrusion
918533
Dispense Valve, Extrusion, Ambient, Ball Seat
918535
Dispense Valve, Extrusion, Ambient, Snuff Back
239716
G3000 Spur Gear Meter with sensor, Flow meter assembly, G3000 spur gear, meter and sensor
239719
Flow meter, G3000 spur gear, does not include sensor
244292
G3000HR high resolution Spur Gear Meterwith sensor; Flow meter assembly, G3000HR spur gear, meter and sensor
244930
Manifold, Fluid Inlet, AutoPlus SAE valve
244535
EnDure Valve replacement, no manifold
244910
EnDure Valve with ambient or temperature conditioning manifold
244961
EnDure Valve with 120 volt electric heat (200 oF) (93.3°C)
244962
EnDure Valve with 230 volt electric heat (200 oF) (93.3°C)
233670
AutoPlus SAE valve
347002
Manual Airless Spray Gun without Electrostatic
G233670
AutoPlus SAE valve
DG2D1A
HAND APPLICATORS, 120V
DG2D2B
HAND APPLICATORS, 240V
DG2D1B
HAND APPLICATORS, 120V
DG2D2A
HAND APPLICATORS, 240V

Cobra 2-K unit (40-10) (Se evt. under U850.xxx)
V 44 321 60 012
Material pressure tank that meet the highest demands in terms of quality and product safety.
V 24 531 21 . . 3
Spray guns for 2-component dispersion adhesives
V2453121
Spray guns for 2-component dispersion adhesives
Pilot 93-ND-K
HVLP spray gun model for dispersion adhesives.Gun body: high-quality plastic.All wetted parts made of stainless steel.Weight: 390 g.Wide-to-round jet nozzle insert, sizes available:0.5,0.8,1.0,1.2,1.4,1.5,1.8 /2.0,2.2,2.5 mm ?yle=
V1163103
HVLP spray gun model for dispersion adhesives.Gun body: high-quality plastic.All wetted parts made of stainless steel.Weight: 390 g.Wide-to-round jet nozzle insert, sizes available:0.5,0.8,1.0,1.2,1.4,1.5,1.8 /2.0,2.2,2.5 mm ?yle=
V 10 352 21 . . 1

V1035221

V2035751033
PILOT Signier-Membrane Diaphragm version. Especially suitable for use with abrasive and moisture-curing spray mediaFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.
V 20 357 51 . . 3
PILOT Signier-Membrane Diaphragm version. Especially suitable for use with abrasive and moisture-curing spray mediaFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.
V 20 331 51 . . 3

V2033151

V 20 332 51 . . 3
PILOT BlockSmall semi-automatic spray gun.Extremely short switching times.Round jet nozzle insert, sizes avaiable:0.3,0.5,0.8,1.0 mm
V2033251XX3
PILOT BlockSmall semi-automatic spray gun.Extremely short switching times.Round jet nozzle insert, sizes avaiable:0.3,0.5,0.8,1.0 mm
V 20 360 51 . . 3
PILOT SignierFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V2036051__3
Fully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V 20 361 51 . . 3
PILOT SignierFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V2036151XX3
PILOT SignierFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V 20 360 02 . . 3
PILOT SignierFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V2036002XX3
PILOT SignierFully automatic spray gun for a wide range of finespraying jobs, especially dot-marking operations.Extremely short switching times.With pull-bar for manual cleaning operation.
V 20 530 03 . . 3
Automatic Spray Gun
V2053003
Automatic Spray Gun
V 20 540 06 . . 3
Automatic Spray Gun
V2054006__3
Automatic Spray Gun
V 20 543 03 . . 3
Automatic Spray Gun
V2054303__3
Automatic Spray Gun
V 20 551 04 . . 3
Automatic Spray Gun
V2055104
Automatic Spray Gun
PILOT WA 450
PILOT WA 450
V2054506
Automatic Spray Gun
V 20 545 06 . . 3
Automatic Spray Gun
V 20 547 03 . . 3
Automatic Spray Gun
V2054703
Automatic Spray Gun
V 20 305 51 . . 3
PILOT WA 50 Compact-size automatic spray gun for the finest spraying jobs,made entirely of stainless steel.
V2030551__3
PILOT WA 50 Compact-size automatic spray gun for the finest spraying jobs,made entirely of stainless steel.
V 20 515 02 . . 3
Automatic Spray Gun
V2051502
Automatic Spray Gun
117774
Cable, robot analog, 40 ft. (12.2 m)
198731
Cable, High Flex Operation, 20 ft. (6.1 m)
198296
Cable, High Flex Operation, 60 ft. (18.3 m)
198732
Cable, High Flex Operation, 125 ft. (38.1 m)
117751
Cable, Standard Flex Operation, 20 ft. (6.1 m)
117752
Cable, Standard Flex Operation, 60 ft. (18.3 m)
117753
Cable, Standard Flex Operation, 125 ft. (38.1 m)
117747
Cable, Low Flex Operation, 20 ft. (6.1 m)
117748
Cable, Low Flex Operation, 60 ft. (18.3 m)
117749
Cable, Low Flex Operation, 125 ft. (38.1 m)
234191
Cable, Heated Pressure Sensor
BF0441TD2S
1 Nozzle Bead.
BF0441BD1S
1 Nozzle Bead.
BF0441P__D1S
1 Nozzle Bead
BF0441P__D2S
1 Nozzle Bead
401.07.84
Twin-Snuffer valve, with Air/Solvent Purge, V-Packing, (manual)
257015
Manual Airless Spray Gun without Electrostatic, Gun AG-14 f-thread 11/16" NPS1/4"
257016
Manual Airless Spray Gun without Electrostatic
204938
Teflon hose, SS braid, 0.25 (6.35 mm) ID, 25' (7.62 m) long, 3000 psi (207 bar, 20.7 MPa)
205058
Teflon hose, SS braid, 0.25 (6.35 mm) ID, 6' (7.83 m) long, 3000 psi (207 bar, 20.7 MPa)
205099
Teflon hose, SS braid, 0.25 (6.35 mm) ID, 2.5' (0.76 m) long, 3000 psi (207 bar, 20.7 MPa)
205349
Teflon hose, SS braid, 0.25 (6.35 mm) ID, 15' (4.57 m) long, 3000 psi (207 bar, 20.7 MPa)
206024
Teflon hose, SS braid, 0.25 (6.35 mm) ID, 50' (15.24 m) long, 3000 psi (207 bar, 20.7 MPa)
235905
Teflon hose, SS braid, 0.308 (7.82 mm) ID, 2.5'(0.76 m) long, 5000 psi (345 bar, 34.5 MPa)
511381
Teflon hose, SS braid, 0.401 (10.19 mm) ID, 10' (3.05 m) long, 4000 psi (276 bar, 27.6 MPa)
511385
Teflon feed, , (19.05 mm) 10' (3.05 m) long, SS braid, Teflon feed, 4000 psi (276 bar, 27.6 MPa)
511387
Teflon feed, , (19.05 mm) 25' (7.62 m) long, SS braid, Teflon feed, 4000 psi (276 bar, 27.6 MPa)
511390
Teflon feed, 1"(25.4 mm), 10' (3.05 m) long, SS braid, Teflon feed, 4000 psi (276 bar, 27.6 Mpa)
512028
Teflon hose, SS braid, 0.187 (4.75 mm) ID, 10' (3.05 mm) long, 3000 psi (207 bar, 20.7 MPA)
514428
Teflon hose, SS braid, 0.25 (6.35 mm)ID, 10' (3.05 m) long, 3000 psi (207 bar, 20.7 MPa)
685602
Teflon hose, SS braid, 0.308 (7.82 mm) ID, 15' (4.57 m)long, 4000 psi (276 bar, 27.6 MPa)
685603
Teflon hose, SS braid, 0.308 (7.82 mm) ID, 25' (7.62 m) long, 4000 psi (276 bar, 27.6 MPa)
685605
Teflon hose, SS braid, 0.617 (15.67 mm) ID, 6' (1.83 m) long, 4000 psi (276 bar, 27.6 MPa)
685606
Teflon hose, SS braid, 0.617 (15.67 mm)ID, 10' (3.05 m) long, 4000 psi (276 bar, 27.6 MPa)
685607
Teflon hose, SS braid, 0.617 (15.67 mm) ID, 15' (4.57 m) long, 4000 psi (276 bar, 27.6 MPa)
685612
Teflon hose, SS braid, 0.22 (5.59 mm) ID, 6' (1.83 m) long, 4000 psi (276 bar, 27.6 MPa)
686608
Teflon hose, SS braid, 0.617 (15.67 mm) ID, 25' (7.62 m) long, 4000 psi (276 bar, 27.6 MPa)
C12288
Teflon hose, SS braid, 0.51 (12.95 mm) ID, 10' (3.05 m) long, 1500 psi (103 bar, 10.3 MPa)
C58318
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available
918447
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available
243700
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available
426.04.04
DISPENSING VALVE, ONE COMPONENT METERING SYSTEM
418.00.00
Precision Metering of Single Component Media
418.00.01
Precision Metering of Single Component Media
418.01.00
Precision Metering of Single Component Media
418.10.00
Precision Metering of Single Component Media
417.01.30
Precision Metering of Single Component Media
417.01.00
Precision Metering of Single Component Media
417.01.20
Precision Metering of Single Component Media
417.01.60
Precision Metering of Single Component Media
417.02.00
Precision Metering of Single Component Media
417.01.01
Precision Metering of Single Component Media
417.01.02
Precision Metering of Single Component Media
419.03.00
Precision Metering of Single Component Media
417.03.30
Precision Metering of Single Component Media
417.01.43
Precision Metering of Single Component Media
417.01.45
Precision Metering of Single Component Media
417.01.44.
Precision Metering of Single Component Media
417.01.46
Precision Metering of Single Component Media
415.01.70
Precision Metering of Single Component Media
415.01.71
Precision Metering of Single Component Media
415.01.72
Precision Metering of Single Component Media
415.01.73
Precision Metering of Single Component Media
415.01.74
Precision Metering of Single Component Media
415.01.75
Precision Metering of Single Component Media
415.12.55
Precision Metering of Single Component Media
415.12.50
Precision Metering of Single Component Media
415.12.60
Precision Metering of Single Component Media
415.12.00
Precision Metering of Single Component Media
415.100.0
Precision Metering of Single Component Media
415.12.15
Precision Metering of Single Component Media
415.100.5
Precision Metering of Single Component Media
415.12.40
Precision Metering of Single Component Media
415.101.7
Precision Metering of Single Component Media
415.12.27
Precision Metering of Single Component Media
415.12.28
Precision Metering of Single Component Media
415.12.29
Precision Metering of Single Component Media
415.12.21
Precision Metering of Single Component Media
415.101.0
Precision Metering of Single Component Media
415.102.0
Precision Metering of Single Component Media
401.05.36
Twin-Snuffer valve, possible to fit to the vacuum chamber 560.02.30, Heated 230V, 16 W, PT100 Sensor
403.04.70
Precision Metering of Single Component Media
404.04.70/71
Precision Metering of Single Component Media
403.04.00
Precision Metering of Single Component Media
402.26.41
Integrated Pneumatic Control , Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.26.01
Integrated Pneumatic Control , Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.26.31
Integrated Pneumatic Control , Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.20
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.40
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.00
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.50
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.60
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.30
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.70
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
402.26.00
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
402.25.55
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
402.26.30
Ball Seat Tungsten Carbide , Integrated Diaphragm Seal
400.26.93
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Ball Seat Tungsten Carbide
402.13.00
DISPENSING VALVE PRECONTROL
402.05.20
TWIN SNUFFER VALVE ID 2 (Mixer M8x1)
402.05.40
TWIN SNUFFER VALVE ID 2 (Mixer M8x1) stainless
402.05.21
TWIN SNUFFER VALVE ID 2
402.05.22
TWIN SNUFFER VALVE ID 2 Stainless
402.05.23
TWIN SNUFFER VALVE ID 2 V-Packing
402.05.11
TWIN SNUFFER VALVE ID 2 EPDM
402.04.30
Precision Metering of Single Component Media
402.04.00
Precision Metering of Single Component Media
402.03.50
Precision Servo Controlled Metering of Single Component Media
402.02.00
Precision Servo Controlled Metering of Single Component Media
401.10.00
Membrane Dispensing Valves
401.08.01
DISPENSING VALVE, SNUFFER, TC.
401.08.02
DISPENSING VALVE
401.08.00
DISPENSING VALVE, SNUFFER, STAND.
401.07.70
DISPENSING VALVE, Stainless Steel, CHECK-VALVE
401.07.60
MATERIAL VALVE, HIGH PRESURE Stainless Steel
400.05.60
Twin-Snuffer valve, Double Step Seal, Standard
401.05.88
Twin-Snuffer valve, Double Step Seal, EPDM
401.05.60
Twin-Snuffer valve, V-Packing, Standard
401.06.40
Twin-Snuffer valve, V-Packing, Tungsten Carbide
401.06.45
Twin-Snuffer valve, V-Packing, Tungsten Carbide O-Ring Silicone
401.05.63
Twin-Snuffer valve, V-Packing, EPDM
401.06.80
Twin-Snuffer valve, V-Packing, stainless, EPDM
401.06.60
Twin-Snuffer valve, V-Packing, Stainless
401.05.80
Twin-Snuffer valve, Double Step Seal, angled
401.06.50
Twin snuffer valve V-packing stainless, Head totally V4A, V-Packing,
401.05.40
Twin-Snuffer valve, Standard, (only A snuffered)
401.05.33
Valve Head, equal as 401.05.35, but additional Fixing Holes for recirculation parts, 530.20.50, 530.20.55
401.07.35
Valve head to Twin valve, A-Side PU Lip Seal,B-Side NBR Lip Seal
403.05.40
Twin-Snuffer valve, Stainless, (only A snuffered)
401.05.50
Twin-Snuffer valve, B-side minimize
403.07.80
Twin-Snuffer valve, A side Tungsten Carbide, Stainless
401.05.20
Twin-Snuffer valve, V-Packing, angled
401.06.20
Twin-Snuffer valve, V-Packing, angled, Stainless
400.05.50
Twin-Valve, Standard, (Plastic Mixer)
401.05.95
Twin-Valve, for Plastic Mixer, 2 Blind-Plate
401.05.00
Twin-Valve, for Plastic Mixer, - 2 Blind-Plate, Standard
403.05.00
Twin-Valve, for Plastic Mixer, Stainless, 2 Blind-Plate
401.05.90
Twin-Valve, for Plastic Mixer, high resist. to abrasion, 2 Blind-Plate
401.05.22
Twin-Valve, for Plastic Mixer, 2 Solvent-Valve, without Tube for hardener (Plastic Mixer UN 1 5/16-12)
401.05.19
Twin-Valve, for Plastic Mixer, 2 Blind Plate, without Tube for hardener (Plastic Mixer UN 1 5/16-12)
401.04.70
Precision Metering of Single Component Media
401.04.02
Precision Metering of Single Component Media
401.04.00
Precision Metering of Single Component Media
401.03.71
VALVE HEAD 2xVARI-SEAL
401.03.30
Dispensing Valve, LAMINATING SYSTEM
401.03.27
MATERIAL BLOCK Stainless Steel CHECK-VALVES
401.03.26
MATERIAL BLOCK (to 401.03.04)
401.03.25
MATERIAL BLOCK, HIGH PRESSURE, Stainless Steel CHECK-VALVES
401.03.24
MATERIAL BLOCK Stainless Steel WEEPHOLES
401.03.23
MATERIAL BLOCK Stainless Steel
401.03.22
MATERIAL BLOCK WITH WEEPHOLES
401.03.21
VALVE HEAD TO LAMINATING DISPENSING VALVE
401.03.20
VALVE HEAD TO ONE COMPONENT METERING UNIT
401.03.08
DISPENSING VALVE WITHOUT WEEPHOLES, Stainless Steel
401.03.09
DISPENSING VALVE WITHOUT WEEPHOLES, Stainless Steel
401.03.07
DISPENSING VALVE WITH WEEPHOLES, Stainless Steel
401.03.05
DISPENSING VALVE WITH WEEPHOLES, STANDARD
401.03.04
DISPENSING VALVE DOUBLE ACTION 70 MM
401.03.03
Dispensing Valve, DOUBLE ACTION
400.03.00
DISPENSING VALVE, STANDARD
401.03.00
STANDARD, DOUBLE ACTION
401.03.02
DISPENSING VALVE, ONE COMPONENT METERING SYSTEM
401.02.65
SOLVENT VALVE
401.02.53
CYLINDER COMPLET (BRACKET)
401.02.50
CYLINDER COMPLET (BOTTOM)
401.02.36
SOLVENT VALVE Stainless Steel
401.02.35
SOLVENT VALVE STANDARD
401.02.30
Dispensing Valve, Stainless Steel
401.02.03
Dispensing Valve, TUNGSTEN CARBIDE
401.02.02
Dispensing Valve, Stainless Steel
401.02.01
Dispensing Valve, STANDARD
401.02.00
Dispensing Valve, STANDARD
400.25.93
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available , Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
400.25.94
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
400.25.92
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
400.25.91
Spring-Operated Regulator with Carbon Steel Body , Integrated input filter , Harden Steel
400.25.95
Spring-Operated Regulator with Carbon Steel Body , Harden Steel
400.25.80
Regulators with piston , Special regulator for two component silicones
400.07.90
CYLINDER DRIVE 2x40
400.07.71
Twin-Snuffer valve, Double Step Seal, (for blowing air)
401.07.71
Twin-Snuffer valve, Double Step Seal, (for blowing air), stainless
400.07.77
Twin-Snuffer valve, with Air/Solvent Purge (manual)
400.07.60
DISPENSING VALVE WITH WEEPHOLES, STANDARD
400.07.61
DISPENSING VALVE WITHOUT WEEPHOLES, STANDARD
400.07.62
DISPENSING VALVE WITHOUT WEEPHOLES, STANDARD
400.07.40
MATERIALBLOC
400.07.20
CYLINDER DRIVE 2x70
400.04.00
SNUFFER VALVE
400.03.90
DISPENSING VALVE, TO MIXINGBLOCK
400.03.80
Dispensing Valve, STANDARD
400.03.57
MATERIAL BLOCK (SEAT + BALL)
400.03.55
MATERIAL BLOCK (NOZZLE)
400.03.46
VALVE HEAD Stainless Steel
400.03.41
VALVE HEAD STANDARD
400.03.40
DISPENSING VALVE, Stainless Steel
400.03.22
MATERIAL BLOCK
400.03.20
CYLINDER DRIVE 1x40
401.03.01
STD., DOUBLE ACTION, Stainless Steel
400.02.83
DISPENSING HEAD Stainless Steel
400.02.66
DISPENSING HEAD TUNGSTEN C.
400.02.64
DISPENSING HEAD
400.02.63
DISPENSING HEAD
234168
Fluid Plate, Ambient Cartridge Regulator with No FLow Meter
234165
Fluid Plate, Ambient Cartridge Regulator with a G3000 Flow Meter
234166
Fluid Plate, Ambient Cartridge Regulator with a G3000HR Flow Meter
234167
Fluid Plate, Ambient Cartridge Regulator with Helical Flow Meter
234195
Fluid Plate, Ambient Cartridge Regulator with High Resolution Helical Flow Meter
109015
Low Pressure Piston Pump 3-130S PE+TG
109016
Low Pressure Piston Pump 3-130S PE+TG
109017
Low Pressure Piston Pump 3-130S PE+T
109029
Low Pressure Piston Pump 3-130S PE+L
109030
Low Pressure Piston Pump 3-130S PE+L
238894
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available
238893
Material pressure regulators for a reduced and continuous material pressure for allmetering and dispensing applications Maintains fluid pressure for consistent bead controlAmbient and heated models available
244734
Cartridge regulator with transducer ports for fluid plates
236156
Low Pressure HVLP Tank
236155
Low Pressure HVLP Tank
236146
Low Pressure HVLP Tank
236143
Low Pressure HVLP Tank
236147
Low Pressure HVLP Tank
236144
Low Pressure HVLP Tank
236148
Low Pressure HVLP Tank
236145
Low Pressure HVLP Tank
105082
Piston pump 22-18S PE/TG, EvoMotion High Pressure Stainless Steel Piston Pump
105083
Piston pump 22-18S PE+T, EvoMotion High Pressure Stainless Steel Piston Pump
394004
GM 4600AC 16MPa NPSM1/4"
394020
GM 4600AC VC
394002
GM 4100AC 16MPa NPSM1/4"
394010
GM 4100AC VC
394012
GM 4100AC 25MPa NPSM1/4"
FlexControl Plus
FlexControl plus ESTA VC

Valve assy 2M/2D/2F EB3500
383060
Automatic Spray Gun with SupraCoat Atomization, HVLP
383061
Automatic Spray Gun with SupraCoat Atomization, HVLP
383062
Automatic Spray Gun with SupraCoat Atomization, HVLP
383027
Automatic Spray Gun with SupraCoat Atomization, HVLP
383020
Automatic Spray Gun with SupraCoat Atomization, HVLP
383021
Automatic Spray Gun with SupraCoat Atomization, HVLP
383022
Automatic Spray Gun with SupraCoat Atomization, HVLP
383023
Automatic Spray Gun with SupraCoat Atomization, HVLP
383024
Automatic Spray Gun with SupraCoat Atomization, HVLP
383025
Automatic Spray Gun with SupraCoat Atomization, HVLP
383026
Automatic Spray Gun with SupraCoat Atomization, HVLP
383017
Automatic Spray Gun with SupraCoat Atomization, HVLP
383010
Automatic Spray Gun with SupraCoat Atomization, HVLP
383011
Automatic Spray Gun with SupraCoat Atomization, HVLP
383012
Automatic Spray Gun with SupraCoat Atomization, HVLP
383013
Automatic Spray Gun with SupraCoat Atomization, HVLP
383014
Automatic Spray Gun with SupraCoat Atomization, HVLP
383015
Automatic Spray Gun with SupraCoat Atomization, HVLP
383016
Automatic Spray Gun with SupraCoat Atomization, HVLP
383008
Automatic Spray Gun with SupraCoat Atomization, HVLP
383001
Automatic Spray Gun with SupraCoat Atomization, HVLP
383002
Automatic Spray Gun with SupraCoat Atomization, HVLP
383003
Automatic Spray Gun with SupraCoat Atomization, HVLP
383004
Automatic Spray Gun with SupraCoat Atomization, HVLP
383005
Automatic Spray Gun with SupraCoat Atomization, HVLP
383006
Automatic Spray Gun with SupraCoat Atomization, HVLP
383007
Automatic Spray Gun with SupraCoat Atomization, HVLP
380002
Automatic AirCoat Spray Gun, Internal Control
380001
Automatic AirCoat Spray Gun
363961
Manual Electrostatic Spray Gun with AirCoat Atomization Round Spray
363962
Manual Electrostatic Spray Gun with AirCoat Atomization Round Spray
363963
Manual Electrostatic Spray Gun with AirCoat Atomization Round Spray
363964
Manual Electrostatic Spray Gun with AirCoat Atomization Fan Spray
363965
Manual Electrostatic Spray Gun with AirCoat Atomization Fan Spray
363966
Manual Electrostatic Spray Gun with AirCoat Atomization Fan Spray
363967
Manual Electrostatic Spray Gun with AirCoat Atomization Fan Spray
363960
Manual Electrostatic Spray Gun with AirCoat Atomization Round Spray
0179045-15
Spray gun GM 2000EACR 15m Cabel
0179045-20
Spray gun GM 2000EACR 20m Cabel
0179045-25
Spray gun GM 2000EACR 25m Cabel
0179045-30
Spray gun GM 2000EACR 30m Cabel
0179045-35
Spray gun GM 2000EACR 35m Cabel
0179045-40
Spray gun GM 2000EACR 40m Cabel
0179045-45
Spray gun GM 2000EACR 45m Cabel
0179045-50
Spray gun GM 2000EACR 50m Cabel
0179046-15
Spray gun GM 2000EACFB 15m Cabel
0179046-20
Spray gun GM 2000EACFB 20m Cabel
0179046-25
Spray gun GM 2000EACFB 25m Cabel
0179046-30
Spray gun GM 2000EACFB 30m Cabel
0179046-35
Spray gun GM 2000EACFB 35m Cabel
0179046-40
Spray gun GM 2000EACFB 40m Cabel
0179046-45
Spray gun GM 2000EACFB 45m Cabel
0179046-50
Spray gun GM 2000EACFB 50m Cabel
Cobra
Diaphragm pump Cobra 40-10
Cobra
Diaphragm pump Cobra 40-10 frame assy.

Paint stage 130S PE+TG (SP)

Paint stage 130S PE+T (SP)
179052
Material valve metal GM/GA 2800EA

Spray gun GM 2800 AE with 11 m./36' cable (LP - USA model)

Automatic gun GA 2005 EACR - 11m (36') - EC

Control unit EPG2005

Gun Flush Box (GFB) for G14, G17

Leopard pumpe 48-110 PE/TG

Leopard 18-300                

Diaphragm pump Cobra 40-10 on a frame

Piston pump 3-130S PE+T # Out of production - use 109047

Temperature Controller "A 32 Ex"

Valve 2-K

Suction manifold assy.

Manual mixer extern

CCM-2K HP

Mixing block assy.

Inner frame CCM HD

Mixing block assy.

Crosshead

Pillow block

Guide piece

Manifold block assy.

Mixing block

Pump 14 cm3, teflon

Spray gun GM 2800 AE (LP - USA model - special length: 20, 25, 30, 35, 40, 45 or 50 m)

Electr. control unit VM2000 W

Control unit assy VM200

Control unit assy VM200 USA

Control unit VM2000 - 230 Volt

Control unit VM 2000W USA

Control unit VM 2000 USA

Air hose assy

3' extension with swivel joint

6' extension with swivel joint

Module HVM 2082 W

Control unit EPG2000 W

Module HVM 2082

Module HVM2082 red.

Adapterbox cpl.

Air motor 10" right

Mixer cpl.

AquaCoat AirCoat VC

Air cap 2900EACW assy

Wagner Kolbenpumpe Wildcat 18-40 USA

High Pressure Piston Pump Leopard 18-300 PE/TG M16 x 1.5 - No longer valid

High Pressure Piston Pump Leopard 18-300 PE/TG

Wall mounting bracket for 6" Air Motors 6" (Leopard)

Stand 6 assy.

HP-Filter-3/4"-1.4401-valve CS

HP-Filter-3/4"-1.4401-valve SSt

Package-conversion of basic unit A=1 int

Basic package for 2B products

Package for additional A or B product

Remote control box

Package for pressure regulation

Package-conversion of pressure into flow

Package for teleservice

Air coat automatic gun GA3000AC EC robot

Air Coat Auto.-Pistole GA3000AC IC OEM01

Electrostatic power generator EPG3000

Electrostatic power generator EPG3000 ex

Inverter control cabinet ICC1150X

Inverter control cabinet ICC2075X

Inverter control cabinet ICC2150X

Gun automatic module GAM3000

Gun automatic module GAM3000 ext

Rack modular Painting system

Light barrier

Impuls generator 14 imp./ revolution

Impuls generator 100 imp./ revolution

Light curtain SCAN S30-450

Light curtain SCAN S30-1200

Light curtain SCAN S30-1650

Light curtain SCAN S30-2025

Light curtain SCAN S30-2400

FlexControl basic unit

FlexControl basic unit Atex

FC+ Ex ND 2A1AS1AL2B1BS NL Deknudt 1

FC+ EX ND 1A1AS1B1BS S Inwido 2

FC+ ND 8A1AS1AL4B1BS USA WPNA 4

FC+ HP 3A1AS1B1BS USA Messe 1

High rotation atomizer Evobell 3000 VC

High rotation atomizer Evobell 3500 VC

Material tube d2.2 assy EB3500

Adjusting- & mounting tool bell d70

Intermediate piece

Service set turbine EB3500

Automatic on/off of Elst. for Manual Spray Guns

Atomizing air in 2K Ex unit

Atomizing air in 2K unit

PC data archiving FC plus V3

Twin hose: Matr. DN3 & Air DN6 - 7½ m. (25')

Twin hose: Matr. DN4 & Air DN6 - 7½ m. (25')

LX70 in-line spray gun

Manual HVLP gun, Series 3100H (AirSpray)

Zahnradpumpe 0,6 cc mit Block

Zahnradpumpe 3,0 cc mit Block

Gear pump 0,6cc 1611-1

High rotation atomizer Evobell 3500 VC

Lichtwellenleiter Kunstst-LWL SHEN-1016

HV Power supply cpl.

HP-hose DN10 530 bar (7,685 Psi) 30m (99') 3/8"

HP-Hose DN6 400 bar (5,800 Psi) 30m (99') (M16x1,5)

MPR-HF 40/1-20bar man. SSt; Mano.

Sensor (for changing direction on an IceBreaker pump) - 3813023 is replaced by T702.00 and 0369290.

Cpl. Agitator on lid (UK ver.) with suction pipe for 5 Gallon container

HP hose DN6 270 bar (3,915 Psi) 30m. (NPS 1/4" both sides)

Pressure tank 2½ Gallon with regulators

Air hose assy NW6; 10m

Air hose assy NW6; 15m

Air hose assy NW6; 20m

Air hose assy

Air-hose-DN8-PN15-G1/4"-30,0m-rubber

Gun cable cpl. 15m

Gun cable cpl. 25m

Gun cable cpl. 30m

Gun cable cpl. 35m

Gun cable cpl. 40m

Gun cable cpl. 45m

Gun cable cpl. 50m

Hose striped 11,5m

Hose striped 21,5m

AC-hose-DN4-PN270-1/4"NPS-10,0m-PA

AC-hose-DN4-PN270-1/4"NPS-15,0m-PA

AC-hose-DN4-PN270-1/4"NPS-20,0m-PA

Air hose DN 6 and 30 m (99') long
U053.00CA
Frame PP200

Nitrogen Control System-basic
V4423260312
Material pressure vessel, MDG
101083
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101084
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101085
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101086
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101087
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101088
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
101089
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102137
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102138
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102173
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102174
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102175
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102176
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102177
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
102178
Swirl Application,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103710
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103711
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103712
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103713
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103714
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103716
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
103717
Water Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104562
Armor Coated,Abrasion Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104563
Armor Coated,Abrasion Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104564
Armor Coated,Abrasion Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104566
Armor Coated,Abrasion Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104567
Armor Coated,Abrasion Resistant,Bead,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104640
Armor Coated,Abrasion Resistant,Swirl,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
104641
Armor Coated,Abrasion Resistant,Swirl,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109045
Armor Coated,Abrasion Resistant,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109049
Armor Coated,Abrasion Resistant,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109897
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109898
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109899
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109900
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109901
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109903
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
109904
Bead Applications,Dynaflex Heated hose used to deliver hot-melt adhesive material from a Dynamelt or Dynamini Adhesive Supply Unit to an ITW Dynatec applicator (either a dispensing head or a hand-held applicator.
116769
Jacket, 10' (3.05 m) dispense hose, temperature conditioning
116770
Jacket, 6' (1.83 m) dispense hose, temperature conditioning
106020
Controller Kit
500.15.75
Econo-Mix Piston Metering Pump
500.20.75
Econo-Mix Piston Metering Pump
500.25.75
Econo-Mix Piston Metering Pump
500.30.30
Econo-Mix Piston Metering Pump
500.30.75
Econo-Mix Piston Metering Pump
500.40.75
Econo-Mix Piston Metering Pump
257001
Airless gun AG09S
2305433
Gun AG-14 f-thread 11/16" NPS1/4"
100055
Air Control Kit
Air motor
Air motor NW 200
Air motor
Air motor NW 130
101175

Aquaspray
Aquaspray GA2800 EAW
Cobra 40-10
Bare diaphragm pump Cobra 40-10
106593
Pattern Controller
106594
Pattern Controller
238748
Repair kit, cartridge regulator
244291
Flow meter, G3000HR spur gear, does not include sensor
GA3000AC
Autom. gun GA 3000ACIC S
GA3000AC
Autom. gun GA 3000ACIC G
350007
Automatic spraygun GA 2000EACR
350009
Automatic spraygun GA2000A
350004
Automatic gun GA2000 EACWF
350005
Automatic spraygun GA2000 EAR
350006
Automatic gun GA2000 EACWR
GA_2005
Automatic gun GA2005 EAF short cable
GA_2005
Automatic gun GA2005 EA R short cable
GA_2005
Automatic gun GA2805 EA short cable
GA_2800
Automatic gun GA2800 EAW
179030
Gun GM 2000 AC
179063
Spray gun GM 2000EACFB USA
179045
Spray gun "GM 2000 EACR" w/ special cable lengts
179046
Sprühpistole GM2000 EACF B Sonderlänge
179045-20
Spray gun "GM 2000 EACR" w/ 20m. (66') cable
179045-30
Spray gun "GM 2000 EACR" w/ 30m. (99') cable
GM_2000EACWF
Spray gun GM 2000 EACWF
GM_2000EACWF
Spray gun GM 2000EACWR USA
179034
Spray gun GM 2000EACWF USA
GM_2000EACWR
Spray gun GM 2000 EACWR
GM_2000EAF
Air gun GM 2000 EAF
GM_2000EAR
Air gun GM 2000 EAR
179035
Spray gun GM2100 AC
179031
Spray gun GM2600 AC USA
179033
Spray gun GM2600 AC
179037
Spray gun GM2800 EA
179051
Reversion kit GM2800 EA
394051
GM4100AC Demo set
394014
GM 4600AC 25MPa NPSM1/4"
394050
GM4x00AC Demo set
394052
GM4600AC Demo set
347011
Airless gun G 15 with Wagner Tip
347012
Airless gun G 15 with Profi Tip HD
347020
Airless gun G 15H
347021
Gun G-15H NPS1/4
246786
Sensor, HG6000 helical gear flow meter, all models
234134
Flow meter, ambient helical, w/o sensor
246340
Flow meter, heated helical, w/ sensor
246650
Flow meter, high resolution helical,  w/o sensor
246191
Flow meter, heated helical, w/o sensor
106096
Valve Driver
106097
Valve Driver
MDG
Pressure tank assy.
MDG
Pressure tank assy.
MDG
Pressure tank 2½ Gallon with agitator & regulators
V4422160012
MDG-12 pressure vessel, 6 bar
V4422160013
MDG12-pressure vessel, 6 bar, O
V4422160212
MDG-12 pressure vessel, 6 bar
V4422160213
MDG12 pressure vessel, 6 bar, D
V4422160016
MDG 12, Druckgef.6BAR, ORW,
V4422160213SONDER
MDG-12 pressure vessel, 6 bar
V4422260012
MDG 12, pressure vessel, Verzi
V4423160013
MDG 24, pressure vessel, 6 bar
V4423160016
MDG 24, DRUCKGEF.6BAR, ORW,
V4423160112
MDG24 pressure vessel, 6 bar, H
V4423160313
MDG-24-6 bar pressure vessel, ER
V4423260013
MDG 24, Druckgf., 6 bar, ORW
V4025140012
MDG 4-pressure vessel, 4 bar,
V4025140212
MDG 4, 4 bar, 1A, i + a galvanized
V4025140012SONDER
MDG 4 with elongated Ma
V4025140013
MDG 4-pressure vessel, 4 bar,
V4025140013/001
MDG 4-pressure vessel, 4 bar,
V4025140016
MDG 4, pressure vessel, 4 bar,
V4025140016-001
MDG 4, pressure gradient., 4 bar,
V4025140213
MDG 4, 4 bar, VA 1.4301,
V4424140012
MDG-45-DRUCKGEFAESS 4bar,
V4424140013
MDG 45, 4 bar, ORW, 1A
V4424160012
MDG 45 pressure vessel, 6 bar,
V4424160013
Material pressure vessel MDG 4
V4424160112
MDG45 pressure vessel, 6 bar,
V4424160112-SO
MDG45 pressure vessel, 6 bar,
V4424160212
MDG-45-DRUCKGEFAESS 6bar,
V4424160213
MDG-45 pressure vessel, 6 bar
V4424001602
Case MDG 45, 6 bar, o
V4424140016
MDG 45, pressure gradient., 4 bar, O
V4424140116
MDG 45, pressure vessel, HRW,
V4424140216
MDG45, pressure gradient. 4bar, DR
V4424140216-SO
MDG45, pressure gradient. 4bar, DR
V4424140316
MDG 45, pressure gradient., 4 bar,
V4424160016
MDG 45 pressure gradient. 6bar, OR
V4424160113
MDG45 pressure vessel, 6 bar, H
V4424160216
MDG 45, pressure gradient., 6 bar,
V4424160316
MDG 45, DRUCKGEF.6BAR, ERW,
V4424260212
MDG 45 DRUCKGEFAESS, 6 bar,
L18500
Blanking Kit
110639
Non Adjustable Module Assembly
BF0221M__D1S
1 Nozzle Bead
BF0441TD1S
1 Nozzle Bead.
BF0441TD1W
1 Nozzle Bead, Water Resistant
BF0442TD1S
2 Nozzle Bead
BF0662TD1S
2 Nozzle Bead
BF0884TD1S
4 Nozzle Bead
BF1104TD1S
4 Nozzle Bead
BF0441TD2W
1 Nozzle Bead, Water Resistant
BF0442TD2S
2 Nozzle Bead
BF0662TD2S
2 Nozzle Bead
BF0884TD2S
4 Nozzle Bead
BF1104TD2S
4 Nozzle Bead
BF1546TD2S
6 Nozzle Bead
BF1988TD2S
8 Nozzle Bead
BF0442BD1S
2 Nozzle Bead
BF0662BD1S
2 Nozzle Bead
BF0884BD1S
4 Nozzle Bead
BF1104BD1S
4 Nozzle Bead
104348
Low Profile, 2 Nozzle Bead
104344
Low Profile, 4 Nozzle Bead
BF0441XD1S
Extended, 1 Nozzle Bead
BF0442XD1S
Extended, 2 Nozzle Bead
BF0662XD1S
Extended, 2 Nozzle Bead
BF0884XD1S
Extended, 4 Nozzle Bead
BF1104XD1S
Extended, 4 Nozzle Bead
BF0441WD1S
Swirl, 1 Nozzle Bead
BF0441BD2W
1 Nozzle Bead, Water Resistant
BF0442BD2S
2 Nozzle Bead
BF0662BD2S
2 Nozzle Bead
BF0884BD2S
4 Nozzle Bead
BF1104BD2S
4 Nozzle Bead
BF1546BD2S
6 Nozzle Bead
BF1988BD2S
8 Nozzle Bead
103730
Low Profile, 2 Nozzle Bead
101593
Low Profile, 2 Nozzle Bead
101594
Low Profile, 4 Nozzle Bead
BF0441XD2S
Extended, 1 Nozzle Bead
BF0442XD2S
Extended, 2 Nozzle Bead
BF0662XD2S
Extended, 2 Nozzle Bead
BF0884XD2S
Extended, 4 Nozzle Bead
BF1104XD2S
Extended, 4 Nozzle Bead
BF0442P__D1S
2 Nozzle Bead
BF0662P__D1S
2 Nozzle Bead
BF0884P__D1S
4 Nozzle Bead
BF1104P__D1S
4 Nozzle Bead
BF0442P__D2S
2 Nozzle Bead
BF0662P__D2S
2 Nozzle Bead
BF0884P__D2S
4 Nozzle Bead
BF1104P__D2S
4 Nozzle Bead
BF1546P__D2S
6 Nozzle Bead
BF1988P__D2S
8 Nozzle Bead
BF0441ED1S
Electric Operated, 1 Nozzle, Bead
BF0662ED1S
Electric Operated, 2 Nozzle, Bead
BF0662ED2S
Electric Operated, 2 Nozzle, Bead
N07830
90° Elbow, # 6 JIC
N07831
45° Elbow, # 6 JIC
V1161303083
PILOT Maxi HD Gravity Feed 0.8mm
V1161303123
PILOT Maxi HD Gravity Feed 1.2mm
V1161403033
PILOT Maxi HD material connection 0.3 mm
V1161403123
PILOT Maxi HD material 1.2 mm connector
V1161403153
PILOT Maxi HD material connection 1.5 mm
V1161505083
PILOT Maxi MD Gravity Feed 0.8mm
V1161505103
PILOT Maxi MD Gravity Feed 1.0mm
V1161505153
PILOT Maxi MD Gravity Feed 1.5mm
V1161505183
PILOT Maxi MD Gravity Feed 1.8mm
V1161505203
PILOT Maxi MD Gravity Feed 2.0mm
V1161505223
PILOT Maxi MD Gravity Feed 2.2mm
V1161605083
PILOT Maxi MD material connection 0.8 mm
V1161605153
PILOT Maxi MD material connection 1.5 mm
V1161605183
PILOT Maxi MD material connection 1.8 mm
V1161605203
PILOT Maxi MD material connection 2.0 mm
V1162002153
Pilot Maxi-ND-adhesive 1.5
V1163304053
PILOT Maxi ND Gravity Feed 0.5mm
V1163304083
PILOT Maxi ND Gravity Feed 0.8mm
V1163304153
PILOT Maxi ND Gravity Feed 1.5mm
V1163304183
PILOT Maxi ND Gravity Feed 1.8mm
V1163304203
PILOT Maxi ND Gravity Feed 2.0mm
V1163404123
PILOT Maxi ND material connection 1.2 mm
V1163404143
PILOT Maxi ND material connection 1.4 mm
V1163404153
PILOT Maxi ND material connection 1.5 mm
V1163404183
PILOT Maxi ND material connection 1.8 mm
V1015102033
PILOT Mini-HD flow cup 0.3mm
V1015102053
PILOT Mini-HD flow cup 0.5mm
V1015102083
PILOT Mini-HD flow cup 0.8mm
V1015102123
PILOT Mini-HD flow cup 1.2mm
V1015102153
PILOT Mini-HD flow cup 1.5mm
V1015102183
PILOT Mini-HD flow cup 1.8mm
V1015202123
PILOT Mini-HD material connection 1.2 mm
V1015202183
PILOT Mini-HD material connection 1.8 mm
V1015202223
PILOT Mini-HD material connection 2.2 mm
V1014102123
PILOT Mini-MD Gravity Feed 1.2mm
V1014102153
PILOT Mini-MD Gravity Feed 1.5mm
V1014202053
PILOT Mini-MD material connection 0.5 mm
V1014202123
PILOT Mini-MD material connection 1.2 mm
V1014202153
PILOT Mini-MD material connection 1.5 mm
V1017204033
PILOT Rapid HD material connection 0.3 mm
V1017204053
PILOT Rapid HD material connection 0.5 mm
V1017204083
PILOT Rapid HD material connection 0.8 mm
V1017204103
PILOT Rapid HD material connection 1.0 mm
V1017204123
PILOT Rapid HD material connection 1.2 mm
V1017204153
PILOT Rapid HD material connection 1.5 mm
V1017204183
PILOT Rapid HD material connection 1.8 mm
V1017204203
PILOT Rapid HD material connection 2.0 mm
V1017204223
PILOT Rapid HD material connection 2.2 mm
V1017404033
PILOT Rapid MD material connection 0.3 mm
V1017404053
PILOT Rapid MD material connection 0.5 mm
V1017404083
PILOT Rapid MD material connection 0.8 mm
V1017404103
PILOT Rapid MD material connection 1.0 mm
V1017404123
PILOT Rapid MD material connection 1.2 mm
V1017404153
PILOT Rapid MD material connection 1.5 mm
V1017404183
PILOT Rapid MD material connection 1.8 mm
V1017404203
PILOT Rapid MD material connection 2.0 mm
V1017404223
PILOT Rapid MD material connection 2.2 mm
V2036051033
SIGNIERP. 0.3 MM ROUND, CDI
V2036051103
SIGNIERP. 1.0 MM ROUND, CDI
V2036051153-001
Spray mark, 1.5 mm ru
V2036251103
1.0 mm for spray mark
V2036351033-001
Signierp. 0.3 mm, Spülb. A
V2037002033
Material 0.3 mm needle
V2037051053
E-signing 0.5mm nozzle, Ru
V1060103053
PILOT Trend HD Gravity Feed 0.5mm
V1060103083
PILOT Trend HD Gravity Feed 0.8mm
V1060103103
PILOT Trend HD Gravity Feed 1.0mm
V1060103123
PILOT Trend HD Gravity Feed 1.2mm
V1060103153
PILOT Trend HD Gravity Feed 1.5mm
V1060103183
PILOT Trend HD Gravity Feed 1.8mm
V1060103203
PILOT Trend HD Gravity Feed 2.0mm
V1060103253
PILOT Trend HD Gravity Feed 2.5mm
V1061104053
PILOT Trend MD Gravity Feed 0.5mm
V1061104083
PILOT Trend MD Gravity Feed 0.8mm
V1061104103
PILOT Trend MD Gravity Feed 1.0mm
V1061104123
PILOT Trend MD Gravity Feed 1.2mm
V1061104153
PILOT Trend MD Gravity Feed 1.5mm
V1061104183
PILOT Trend MD Gravity Feed 1.8mm
V1061104203
PILOT Trend MD Gravity Feed 2.0mm
V1061104253
PILOT Trend MD Gravity Feed 2.5mm
V1170103033
PILOT Vario HD Gravity Feed 0.3mm
V1170103053
PILOT Vario HD Gravity Feed 0.5mm
V1170103083
PILOT Vario HD Gravity Feed 0.8mm
V1170103103
PILOT Vario HD Gravity Feed 1.0mm
V1170103123
PILOT Vario HD Gravity Feed 1.2mm
V1170103143
PILOT Vario HD Gravity Feed 1.4mm
V1170103153
PILOT Vario HD Gravity Feed 1.5mm
V1170103183
PILOT Vario HD Gravity Feed 1.8mm
V1170103203
PILOT Vario HD Gravity Feed 2.0mm
V1170103223
PILOT Vario HD Gravity Feed 2.2mm
V1170103253
PILOT Vario HD Gravity Feed 2.5mm
V1170203033
PILOT Vario HD material connection 0.3 mm
V1170203053
PILOT Vario HD material connection 0.5 mm
V1170203083
PILOT Vario HD material connection 0.8 mm
V1170203103
PILOT Vario HD material connection 1.0 mm
V1170203123
PILOT Vario HD material connection 1.2 mm
V1170203143
PILOT Vario HD material connection 1.4 mm
V1170203153
PILOT Vario HD material connection 1.5 mm
V1170203183
PILOT Vario HD material connection 1.8 mm
V1170203203
PILOT Vario HD material connection 2.0 mm
V1170203223
PILOT Vario HD material connection 2.2 mm
V1170203253
PILOT Vario HD material connection 2.5 mm
V1171104033
PILOT Vario MD Gravity Feed 0.3mm
V1171104053
PILOT Vario MD Gravity Feed 0.5mm
V1171104083
PILOT Vario MD Gravity Feed 0.8mm
V1171104103
PILOT Vario MD Gravity Feed 1.0mm
V1171104123
PILOT Vario MD Gravity Feed 1.2mm
V1171104143
PILOT Vario MD Gravity Feed 1.4mm
V1171104153
PILOT Vario MD Gravity Feed 1.5mm
V1171104183
PILOT Vario MD Gravity Feed 1.8mm
V1171104203
PILOT Vario MD Gravity Feed 2.0mm
V1171104223
PILOT Vario MD Gravity Feed 2.2mm
V1171104253
PILOT Vario MD Gravity Feed 2.5mm
V1171204033
PILOT Vario MD material connection 0.3 mm
V1171204053
PILOT Vario MD material connection 0.5 mm
V1171204083
PILOT Vario MD material connection 0.8 mm
V1171204103
PILOT Vario MD material connection 1.0 mm
V1171204123
PILOT Vario MD material connection 1.2 mm
V1171204143
PILOT Vario MD material connection 1.4 mm
V1171204153
PILOT Vario MD material connection 1.5 mm
V1171204183
PILOT Vario MD material connection 1.8 mm
V1171204203
PILOT Vario MD material connection 2.0 mm
V1171204223
PILOT Vario MD material connection 2.2 mm
V1171204253
PILOT Vario MD material connection 2.5 mm
V1172104033
PILOT Vario ND Gravity Feed 0.3mm
V1172104053
PILOT Vario ND Gravity Feed 0.5mm
V1172104083
PILOT Vario ND Gravity Feed 0.8mm
V1172104103
PILOT Vario ND Gravity Feed 1.0mm
V1172104123
PILOT Vario ND Gravity Feed 1.2mm
V1172104143
PILOT Vario ND Gravity Feed 1.4mm
V1172104153
PILOT Vario ND Gravity Feed 1.5mm
V1172104183
PILOT Vario ND Gravity Feed 1.8mm
V1172104203
PILOT Vario ND Gravity Feed 2.0mm
V1172104223
PILOT Vario ND Gravity Feed 2.2mm
V1172104253
PILOT Vario ND Gravity Feed 2.5mm
V1172204033
PILOT Vario ND material connection 0.3 mm
V1172204053
PILOT Vario ND material connection 0.5 mm
V1172204083
PILOT Vario ND material connection 0.8 mm
V1172204103
PILOT Vario ND material connection 1.0 mm
V1172204123
PILOT Vario ND material connection 1.2 mm
V1172204143
PILOT Vario ND material connection 1.4 mm
V1172204153
PILOT Vario ND material connection 1.5 mm
V1172204183
PILOT Vario ND material connection 1.8 mm
V1172204203
PILOT Vario ND material connection 2.0 mm
V1172204223
PILOT Vario ND material connection 2.2 mm
V1172204253
PILOT Vario ND material connection 2.5 mm
V 20 310 02 . . 3
Automatic Spray Gun
V2031002
Automatic Spray Gun
V 20 312 02 . . 3
Automatic Spray Gun
V2031202
Automatic Spray Gun
V 20 330 51 . . 3
PILOT WA 200Fully automatic spray gun for a wide range of fine sprayingjobs, especially in the pharmaceutical and food industry.All wetted parts are made of stainless specialty steel.Extremely short switching times.
V2033051
PILOT WA 200Fully automatic spray gun for a wide range of fine sprayingjobs, especially in the pharmaceutical and food industry.All wetted parts are made of stainless specialty steel.Extremely short switching times.
V2054006033
PILOT WA 400 HD 0.3 mm
V2054006053
PILOT WA 400 HD 0.5 mm
V2054006083
PILOT WA 400 HD 0.8 mm
V2054006103
PILOT WA 400 HD 1.0 mm
V2054006123
PILOT WA 400 HD 1.2 mm
V2054006143
PILOT WA 400 HD 1.4 mm
V2054006153
PILOT WA 400 HD 1.5 mm
V2054006183
PILOT WA 400 HD 1.8 mm
V2054006203
PILOT WA 400 HD 2.0 mm
V2054006223
PILOT WA 400 HD 2.2 mm
V2054006253
PILOT WA 400 HD 2.5 mm
V 20 541 06 . . 3
Automatic Spray Gun
V2054106
Automatic Spray Gun
V2054106033
PILOT WA 410 HD circulation 0.3 mm
V2054106053
PILOT WA 410 HD circulation 0.5 mm
V2054106083
PILOT WA 410 HD circulation 0.8 mm
V2054106103
PILOT WA 410 HD circulation 1.0 mm
V2054106123
PILOT WA 410 HD circulation 1.2 mm
V2054106143
PILOT WA 410 HD circulation 1.4 mm
V2054106153
PILOT WA 410 HD circulation 1.5 mm
V2054106183
PILOT WA 410 HD circulation 1.8 mm
V2054106203
PILOT WA 410 HD circulation 2.0 mm
V2054106223
PILOT WA 410 HD circulation 2.2 mm
V2054106253
PILOT WA 410 HD circulation 2.5 mm
V 20 542 03 . . 3
Automatic Spray Gun
V2054203__3
Automatic Spray Gun
V2054203033
PILOT WA 420 ND 0.3 mm
V2054203053
PILOT WA 420 ND 0.5 mm
V2054203083
PILOT WA 420 ND 0.8 mm
V2054203103
PILOT WA 420 ND 1.0 mm
V2054203123
PILOT WA 420 ND 1.2 mm
V2054203143
PILOT WA 420 ND 1.4 mm
V2054203153
PILOT WA 420 ND 1.5 mm
V2054203183
PILOT WA 420 ND 1.8 mm
V2054203203
PILOT WA 420 ND 2.0 mm
V2054203223
PILOT WA 420 ND 2.2 mm
V2054203253
PILOT WA 420 ND 2.5 mm
V 20 550 04 . . 3
Automatic Spray Gun
V2055004
Automatic Spray Gun
V2054303033
PILOT WA 430 ND circulation 0.3 mm
V2054303053
PILOT WA 430 ND circulation 0.5 mm
V2054303083
PILOT WA 430 ND circulation 0.8 mm
V2054303103
PILOT WA 430 ND circulation 1.0 mm
V2054303123
PILOT WA 430 ND circulation 1.2 mm
V2054303143
PILOT WA 430 ND circulation 1.4 mm
V2054303153
PILOT WA 430 ND circulation 1.5 mm
V2054303183
PILOT WA 430 ND circulation 1.8 mm
V2054303203
PILOT WA 430 ND circulation 2.0 mm
V2054303223
PILOT WA 430 ND circulation 2.2 mm
V2054303253
PILOT WA circulation ND 430 2.5 mm
V 20 305 01 . . 3
PILOT WA 50Compact-size automatic spray gun for the finest spraying jobs,made entirely of stainless steel.
V2030501__3
PILOT WA 50Compact-size automatic spray gun for the finest spraying jobs,made entirely of stainless steel.
V2030501033
PILOT WA 50 0.3 mm wide beam
V2030501053
PILOT WA 50 0.5 mm wide beam
V2030501083
PILOT WA 50 0.8 mm wide beam
V2030501103
PILOT WA 50 1.0 mm wide beam
V2030501123
PILOT WA 50 1.2 mm wide beam
V2030501153
PILOT WA 50 1.5 mm wide beam
V2030551033
PILOT WA 50 0.3 mm round jet
V2030551053
PILOT WA 50 0.5 mm round jet
V2030551083
PILOT WA 50 0.8 mm round jet
V2030551103
PILOT WA 50 1.0 mm round jet
V2030551123
PILOT WA 50 1.2 mm round jet
V2030551153
PILOT WA 50 1.5 mm round jet
V 20 500 06 . . 3
Automatic Spray Gun
V2050006
Automatic Spray Gun
V 20 510 06 . . 3
Automatic Spray Gun
V2051006
Automatic Spray Gun
V 20 520 03 . . 3
Automatic Spray Gun
V2052003
Automatic Spray Gun
V 20 503 04 . . 3
Automatic Spray Gun
V2050304
Automatic Spray Gun
V 20 504 04 . . 3
Automatic Spray Gun
V2050404
Automatic Spray Gun
V 20 600 02 . . 3
Automatic Spray Gun
V2060002
Automatic Spray Gun
V 20 601 02 . . 3
Automatic Spray Gun
V2060102
Automatic Spray Gun
V 20 380 51 . . 3
Automatic Spray Gun
V2038051
Automatic Spray Gun
WA800
Automatic Spray Gun
V 20 800 06 . . 3
Automatic Spray Gun
V2080006__3
Automatic Spray Gun
V2080006053
PILOT WA 800 HD with internal control 0.5 mm
V2080006083
PILOT WA 800 HD with internal control 0.8 mm
V2080006103
PILOT WA 800 HD with internal control 1.0 mm
V2080006123
PILOT WA 800 HD with internal control 1.2 mm
V2080006143
PILOT WA 800 HD with internal controls 1.4 mm
V2080006153
PILOT WA 800 HD with internal control 1.5 mm
V2080006183
PILOT WA 800 HD with internal control 1.8 mm
V2080006203
PILOT WA 800 HD with internal control 2.0 mm
V2080006223
PILOT WA 800 HD with internal control 2.2 mm
V2080006253
PILOT WA 800 HD with internal control 2.5 mm
V 20 805 06 . . 3
Automatic Spray Gun
V2080506__3
Automatic Spray Gun
V2080506053
PILOT WA 805 HD 0.5 mm
V2080506083
PILOT WA 805 HD 0.8 mm
V2080506103
PILOT WA 805 HD 1.0 mm
V2080506123
PILOT WA 805 HD 1.2 mm
V2080506143
PILOT WA 805 HD 1.4 mm
V2080506153
PILOT WA 805 HD 1.5 mm
V2080506183
PILOT WA 805 HD 1.8 mm
V2080506203
PILOT WA 805 HD 2.0 mm
V2080506223
PILOT WA 805 HD 2.2 mm
V2080506253
PILOT WA 805 HD 2.5 mm
V 20 810 06 . . 3
Automatic Spray Gun
V2081006__3
Automatic Spray Gun
V2081006053
PILOT WA 810 HD with internal control - circulation 0.5 mm
V2081006083
PILOT WA 810 HD with internal control - circulation 0.8 mm
V2081006103
PILOT WA 810 HD with internal control - circulation 1.0 mm
V2081006123
PILOT WA 810 HD with internal control - circulation 1.2 mm
V2081006143
PILOT WA 810 HD with internal control - circulation 1.4 mm
V2081006153
PILOT WA 810 HD with internal control - circulation 1.5 mm
V2081006183
PILOT WA 810 HD with internal control - circulation 1.8 mm
V2081006203
PILOT WA 810 HD with internal control - circulation 2.0 mm
V2081006223
PILOT WA 810 HD with internal control - circulation 2.2 mm
V2081006253
PILOT WA 810 HD with internal control - circulation 2.5 mm
V 20 815 06 . . 3
Automatic Spray Gun
V2081506__3
Automatic Spray Gun
V2081506053
PILOT WA 815 HD circulation 0.5 mm
V2081506083
PILOT WA 815 HD circulation 0.8 mm
V2081506103
PILOT WA 815 HD circulation 1.0 mm
V2081506123
PILOT WA 815 HD circulation 1.2 mm
V2081506143
PILOT WA 815 HD circulation 1.4 mm
V2081506153
PILOT WA 815 HD circulation 1.5 mm
V2081506183
PILOT WA 815 HD circulation 1.8 mm
V2081506203
PILOT WA 815 HD circulation 2.0 mm
V2081506223
PILOT WA 815 HD circulation 2.2 mm
V2081506253
PILOT WA 815 HD circulation 2.5 mm
V 20 662 03 . . 3
Automatic Spray Gun
V2066203__3
Automatic Spray Gun
V 20 642 03 . . 3
Automatic Spray Gun
V2064203__3
Automatic Spray Gun
V2064203053
PILOT WA XV draggable 0.5 mm
V2064203083
PILOT WA XV draggable 0.8 mm
V2064203103
PILOT WA XV draggable 1.0 mm
V2064203133
PILOT WA XV draggable 1.3 mm
V2064203153
PILOT WA XV draggable 1.5 mm
V2064203183
PILOT WA XV draggable 1.8 mm
V2064203203
PILOT WA XV draggable 2.0 mm
V2064203253
PILOT WA XV draggable 2.5 mm
V2064203303
PILOT WA XV draggable 3.0 mm
V2064203353
PILOT WA XV draggable 3.5 mm
V2066203053
PILOT WA XV 0.5 mm
V2066203083
PILOT WA XV 0,8 mm
V2066203103
PILOT WA XV 1.0 mm
V2066203133
PILOT WA XV 1.3 mm
V2066203153
PILOT WA XV 1.5 mm
V2066203183
PILOT WA XV 1.8 mm
V2066203203
PILOT WA XV 2.0 mm
V2066203253
PILOT WA XV 2.5 mm
V2066203303
PILOT WA XV 3.0 mm
V2066203353
PILOT WA XV 3.5 mm
V 20 672 03 . . 3
Automatic Spray Gun
V2067203__3
Automatic Spray Gun
V2067203053
PILOT WA XV ND (HVLP system) 0.5 mm
V2067203083
PILOT WA XV ND (HVLP system) 0.8 mm
V2067203103
PILOT WA XV ND (HVLP system) 1,0 mm
V2067203133
PILOT WA XV ND (HVLP system) 1,3 mm
V2067203153
PILOT WA XV ND (HVLP system) 1.5 mm
V2067203183
PILOT WA XV ND (HVLP system) 1.8 mm
V2067203203
PILOT WA XV ND (HVLP system) 2.0 mm
V2067203253
PILOT WA XV ND (HVLP system) 2.5 mm
V2067203303
PILOT WA XV ND (HVLP system) 3,0 mm
V2067203353
PILOT WA XV ND (HVLP system) 3.5 mm
V 20 612 03 . . 3
Automatic Spray Gun
V2061203
Automatic Spray Gun
V1161103123
PILOT-90, 1.2 mm S-K, FB m
V1161103143
Pilot in 1990, 1.4 m, S-K, FB
V1161103153
Pilot-90, 1.5 mm S-K, FB m
V1161206123
Pilot in 1990, 1.2 mm, ZW-K,
V1161206203
Pilot in 1990, 2.0 mm nozzle, ZW
V1161206253
Pilot in 1990, 2.5 mm, ZW-K, F
V1163103083
Pilot 93-ND, 0.8 mm, ND-K
V1163103143
Pilot 1993 ND, 1.4 mm, ND-K
V1163103153
Pilot 1993 ND, 1.5 mm, ND-K
V1163103183
Pilot 1993 ND, 1.8 mm, ND
V1163103203
Pilot 93ND, 2.0 mm, ND-Ko
V1163203153
PILOT-93ND 1.5 mm head-ND
V1163203156
Spray gun 93 ND (Syst
V1163203183
Pilot 1993 ND, 1.9 mm, ND
V1163203203
Pilot 93ND, 2.0 mm, ND-Ko
V1163203223
Pilot 1993 ND, 2.2 mm, ND-K
V1163803183
Pilot ND 93, head 051, HD
V1164302153
Pilot 1993 ND-K (HVLP), 1,
V1164332123
Pilot 1993 adhesive, 1.2 mm,
V1164332153
Pilot 93, adhesive. 1.5 mm,
V1164432123
Pilot 1993 adhesive, 1.2 mm,
V1164802123
Pilot 93, adhesive, 1.2 mm
V1164802153
Pilot 93, adhesive, 1.5 mm,
V 20 820 03 . . 3
Automatic Spray Gun
V2082003__3
Automatic Spray Gun
V2082003053
PILOT WA 820 ND with internal control 0.5 mm
V2082003083
PILOT WA 820 ND with internal control 0.8 mm
V2082003103
PILOT WA 820 ND with internal control 1.0 mm
V2082003123
PILOT WA 820 ND with internal control 1.2 mm
V2082003143
PILOT WA 820 ND with internal control 1.4 mm
V2082003153
PILOT WA 820 ND with internal control 1.5 mm
V2082003183
PILOT WA 820 ND with internal control 1.8 mm
V2082003203
PILOT WA 820 ND with internal control 2.0 mm
V2082003223
PILOT WA 820 ND with internal control 2.2 mm
V2082003253
PILOT WA 820 ND with internal control 2.5 mm
V 20 825 03 . . 3
Automatic Spray Gun
V2082503__3
Automatic Spray Gun
V2082503053
PILOT WA 825 ND 0.5 mm
V2082503083
PILOT WA 825 ND 0.8 mm
V2082503103
PILOT WA 825 ND 1.0 mm
V2082503123
PILOT WA 825 ND 1.2 mm
V2082503143
PILOT WA 825 ND 1.4 mm
V2082503153
PILOT WA 825 ND 1.5 mm
V2082503183
PILOT WA 825 ND 1.8 mm
V2082503203
PILOT WA 825 ND 2.0 mm
V2082503223
PILOT WA 825 ND 2.2 mm
V2082503253
PILOT WA 825 ND 2.5 mm
V 20 830 03 . . 3
Automatic Spray Gun
V2083003__3
Automatic Spray Gun
V2083003053
PILOT WA 830 ND with internal control - circulation 0.5 mm
V2083003083
PILOT WA 830 ND with internal control - circulation 0.8 mm
V2083003103
PILOT WA 830 ND with internal control - circulation 1.0 mm
V2083003123
PILOT WA 830 ND with internal control - circulation 1.2 mm
V2083003143
PILOT WA 830 ND with internal control - circulation 1.4 mm
V2083003153
PILOT WA 830 ND with internal control - circulation 1.5 mm
V2083003183
PILOT WA 830 ND with internal control - circulation 1.8 mm
V2083003203
PILOT WA 830 ND with internal control - circulation 2.0 mm
V2083003223
PILOT WA 830 ND with internal control - circulation 2.2 mm
V2083003253
PILOT WA 830 ND with internal control - circulation 2.5 mm
V 20 835 03 . . 3
Automatic Spray Gun
V2083503__3
Automatic Spray Gun
V2083503053
PILOT WA 835 ND circulation 0.5 mm
V2083503083
PILOT WA 835 ND circulation 0.8 mm
V2083503103
PILOT WA 835 ND circulation 1.0 mm
V2083503123
PILOT WA 835 ND circulation 1.2 mm
V2083503143
PILOT WA 835 ND circulation 1.4 mm
V2083503153
PILOT WA 835 ND circulation 1.5 mm
V2083503183
PILOT WA 835 ND circulation 1.8 mm
V2083503203
PILOT WA 835 ND circulation 2.0 mm
V2083503223
PILOT WA 835 ND circulation 2.2 mm
V2083503253
PILOT WA 835 ND circulation 2.5 mm
V 20 840 04 . . 3
Automatic Spray Gun
V2084004__3
Automatic Spray Gun
V2084004053
PILOT WA 840 MD with internal control 0.5 mm
V2084004083
PILOT WA 840 MD with internal control 0.8 mm
V2084004103
PILOT WA 840 MD with internal control 1.0 mm
V2084004123
PILOT WA 840 MD with internal control 1.2 mm
V2084004143
PILOT WA 840 MD with internal control 1.4 mm
V2084004153
PILOT WA 840 MD with internal control 1.5 mm
V2084004183
PILOT WA 840 MD with internal control 1.8 mm
V2084004203
PILOT WA 840 MD with internal control 2.0 mm
V2084004223
PILOT WA 840 MD with internal control 2.2 mm
V2084004253
PILOT WA 840 MD with internal control 2.5 mm
V 20 845 04 . . 3
Automatic Spray Gun
V2084504
Automatic Spray Gun
V2084504053
PILOT WA 845 MD 0.5 mm
V2084504083
PILOT WA 845 MD 0.8 mm
V2084504103
PILOT WA 845 MD 1.0 mm
V2084504123
PILOT WA 845 MD 1.2 mm
V2084504143
PILOT WA 845 MD 1.4 mm
V2084504153
PILOT WA 845 MD 1.5 mm
V2084504183
PILOT WA 845 MD 1.8 mm
V2084504203
PILOT WA 845 MD 2.0 mm
V2084504223
PILOT WA 845 MD 2.2 mm
V2084504253
PILOT WA 845 MD 2.5 mm
V 20 850 04 . . 3
Automatic Spray Gun
V2085004__3
Automatic Spray Gun
V2085004053
PILOT WA 850 MD with internal control - circulation 0.5 mm
V2085004083
PILOT WA 850 MD with internal control - circulation 0.8 mm
V2085004103
PILOT WA 850 MD with internal control - circulation 1.0 mm
V2085004123
PILOT WA 850 MD with internal control - circulation 1.2 mm
V2085004143
PILOT WA 850 MD with internal control - circulation 1.4 mm
V2085004153
PILOT WA 850 MD with internal control - circulation 1.5 mm
V2085004183
PILOT WA 850 MD with internal control - circulation 1.8 mm
V2085004203
PILOT WA 850 MD with internal control - circulation 2.0 mm
V2085004223
PILOT WA 850 MD with internal control - circulation 2.2 mm
V2085004253
PILOT WA 850 MD with internal control - circulation 2.5 mm
V 20 855 04 . . 3
Automatic Spray Gun
V2085504
Automatic Spray Gun
V2085504053
PILOT WA 855 MD circulation 0.5 mm
V2085504083
PILOT WA 855 MD circulation 0.8 mm
V2085504103
PILOT WA 855 MD circulation 1.0 mm
V2085504123
PILOT WA 855 MD circulation 1.2 mm
V2085504143
PILOT WA 855 MD circulation 1.4 mm
V2085504153
PILOT WA 855 MD circulation 1.5 mm
V2085504183
PILOT WA 855 MD circulation 1.8 mm
V2085504203
PILOT WA 855 MD circulation 2.0 mm
V2085504223
PILOT WA 855 MD circulation 2.2 mm
V2085504253
PILOT WA 855 MD circulation 2.5 mm
403.04.30
Precision Metering of Single Component Media
401.06.00
Precision Metering of Single Component Media
401.04.03
Precision Metering of Single Component Media
402.04.01
Precision Metering of Single Component Media
402.04.02
Precision Metering of Single Component Media
401.04.20
Precision Metering of Single Component Media
403.04.36
Precision Metering of Single Component Media
403.04.37
Precision Metering of Single Component Media
402.04.31
Precision Metering of Single Component Media
402.04.32
Precision Metering of Single Component Media
401.03.70
Dispensing Valve, 2xVARI-SEAL
401.03.06
DISPENSING VALVE WITH WEEPHOLES, Stainless Steel
918537
Dispense Valve, High Viscosity
918539
Dispense Valve, Extrusion, High Flow, High Viscosity
244021
Cable kit, 8 pin connector and 10 ft. cable for 240 VAC valves
501.12.00
Dopag Piston Pump\ Metering\ Standard
501.15.00
Dopag Piston Pump\ Metering\ Standard
501.17.00
Dopag Piston Pump\ Metering\ Standard
501.23.00
Dopag Piston Pump\ Metering\ Standard
501.30.00
Dopag Piston Pump\ Metering\ Standard
501.38.00
Dopag Piston Pump\ Metering\ Standard
501.45.00
Dopag Piston Pump\ Metering\ Standard
501.55.00
Dopag Piston Pump\ Metering\ Standard
501.63.00
Dopag Piston Pump\ Metering\ Standard
501.15.40
Dopag Piston Pump\ Metering\ Stainless
510.17.40
Dopag Piston Pump\ Metering\ Stainless
501.23.40
Dopag Piston Pump\ Metering\ Stainless
501.30.40
Dopag Piston Pump\ Metering\ Stainless
501.38.40
Dopag Piston Pump\ Metering\ Stainless
501.45.40
Dopag Piston Pump\ Metering\ Stainless
501.55.40
Dopag Piston Pump\ Metering\ Stainless
501.63.40
Dopag Piston Pump\ Metering\ Stainless
510.30.80
Dopag Piston Pump\ Metering\ Valve Seat Sharpe Edge
510.17.70
Dopag Piston Pump\ Metering\ Seals EPDM
501.23.70
Dopag Piston Pump\ Metering\ Seals EPDM
501.30.70
Dopag Piston Pump\ Metering\ Seals EPDM
501.38.70
Dopag Piston Pump\ Metering\ Seals EPDM
501.45.70
Dopag Piston Pump\ Metering\ Seals EPDM
501.15.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.17.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.23.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.30.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.38.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.45.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.55.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
501.63.24
Dopag Piston Pump\ Metering\ Lip Seal Packing Retainer
Pump
Piston pump 3-130S PE/TG
Pump
Piston pump 3-130S/cart
Pump
Piston pump 3-130S/cart
Pump
Piston pump 3-130S PE/T
Pump
Pump 120cm3 S TG
Pump
Piston pump 3-130S/stand
Pump
Piston pump 3-130S/stand
Pump
Piston pump 3-130S/stand
Pump
Piston pump 3-130S/cart
Pump
Piston pump 3-130S PE/L
369121
High Pressure Piston Pump Jaguar 75-150 PE/TG
369122
High Pressure Piston Pump Jaguar 75-150 PE/L
369123
High Pressure Piston Pump Jaguar 75-150 PE/T
369125
High Pressure Piston Pump Jaguar 38-300 PE/TG
369124
High Pressure Piston Pump Jaguar 38-300 PE/T
370102
High Pressure Piston Pump Tiger 72-300 PE/L
370103
High Pressure Piston Pump Tiger 72-300 PE/T
370104
High Pressure Piston Pump Tiger 72-300 PE/TG
369107
Low Pressure Piston Pump Jaguar 9-1200
369007
Low Pressure Piston Pump Jaguar 9-1200
369011
Low Pressure Piston Pump Jaguar 9-1200 PE/T
Pump
Pump 70cm3 32-150/90
Pump
Pump 40cm3 S
Pump
Pump 90cm3 S
Pump
Pump 150cm3 S TE+TG
Pump
Pump 70cm3 S PE+T Vario
Pump
Piston pump 22-18S PE+TG
Pump
Piston pump 22-18S PE+TG
Pump
Piston pump 22-18S PE+T
Pump
Piston pump 22-18S/stand
Pump
Piston pump 22-18S/stand
Pump
Piston pump 22-18S/cart
Pump
Piston pump 22-18S/weel CH/star
Pump
Piston pump 22-18S/cart
Pump
Piston pump 22-18S/weel CH/star
Pump
Pump 23-S-2KC PE+TG
Pump
Mixing block cpl. 2KC
Pump
Pump 40-S-2KC PE+TG
Pump
Pump 16-S 2K PE+T
Pump
Pump 23-S 2KC PE+TG
Pump
Pump 250 cm3 S special PE+TG A side
Pump
Pump 250 cm3 S special PE+T B side
Pump
SP Puma 28-40 AquaCoat GM2900EACW
Pump
Wagner piston pump 28-40
Pump
Wagner piston pump 15-70
Pump
Wagner piston pump Puma 8-300
Pump
Wagner piston pump Puma 3-600
Pump
Wagner piston pump 28-40 PE/T
Pump
Wagner piston pump 28-40 PE/TG ESS
Pump
HSA 28-40 puma
Pump
HSA 28-40 puma al
Pump
HSA 28-40 puma al wall version
367101
Wagner KolbenPump Puma 28-40 USA
367109
Low Pressure Piston Pump Pump 8-300nm PE/TG
367112
Wagner piston pump Puma 8-300
367113
Wagner piston pump Puma 3-600 USA
367114
Wagner piston pump Puma 3-600 USA
367271
Piston pump 15-70/ stand
367272
Piston pump 15-70/ stand
367279
Piston pump 28-40/ stand
367280
Piston pump 28-40/ stand
367281
Piston pump 28-40/4-leg
367282
Piston pump 28-40/4-leg
367285
Piston pump 15-70/4-leg
367286
Piston pump 15-70/4-leg
Pump
Wagner piston pump 8-300/cart
Pump
Wagner piston pump 8-300/cart
Pump
Piston pump puma 3-600/cart
Pump
Piston pump puma 3-600/cart
Pump
High Pressure Piston Pump Leopard 35-150 PE/TG
Pump
High Pressure Piston Pump Leopard 18-300 PE/T
Pump
High Pressure Piston Pump Leopard 8-600
Pump
Wagner piston pump Puma 15-150
368063
High Pressure Piston Pump Leopard 18-300 wall
368064
High Pressure Piston Pump Leopard 18-300 cart
368065
High Pressure Piston Pump Leopard 8-600 wall
368066
High Pressure Piston Pump Leopard 8-600 cart
Pump
Piston Pump Puma 15-150/trolley
Pump
Piston Pump Puma 15-150/trolley
Pump
Piston Pump Leopard 35-70/cart
Pump
Piston Pump Leopard. 35-150/cart h. d.
Pump
Piston Pump Leopard. 35-150/cart h. d.
Pump
Piston Pump Leopard 35-150/cart h. d.
Pump
Piston pump Leopard 35-70 with ram/cart
Pump
Piston pump Leopard 35-70 with ram/cart
Pump
Piston pump Leopard 48-110/cart h.d.
Pump
Piston pump Leopard 48-110/cart h.d.
Pump
Piston pump Leopard 48-110/cart h.d.
Pump
Piston pump Leopard 18-300/cart
Pump
Piston pump Leopard 18-300/cart
Pump
Piston pump Leopard 18-300/cart
Pump
Piston pump Leopard 8-600/cart
Pump
Piston pump Leopard 8-600/cart
Pump
Wagner piston pump Jaguar 75-150 PE/TG
Pump
Wagner piston pump Jaguar 38-300 PE/TG
Pump
HP-filter HPF-3
pump
Gear Pump 0,6cc
Pump
EvoMotion 5-125 for drum - Special
Pump
ExtrusionsPump EM 31-40 PP25
Pump
ExtrusionsPump EM 50-150 PP200
Pump
ExtrusionsPump EM 50-235 PP200
Pump
Extrusion pump EM 60-40 PP25
Pump
Pump PM 500
U550.ATSS9
DDP ZIP52 ATSS UN/UN C/CONTA
U550.STSS7
DDP ZIP52 Stainless Steel UN/UN
U550.STSS8
DDP ZIP52 Stainless Steel ??
U551.PHSD7
DDP ZIP52 PF (Perfect Flow) - PHSD UN/UN
U551.SHSS8
DDP ZIP52 PF (Perfect Flow) - ??
U551.STSS8
DDP ZIP52 PF (Perfect Flow) - Stainless Steel ??
U552.GTSS1
DDP ZIP52 GTSS1
U552.GTSS7
DDP ZIP52 GTSS7
U552.PTSS7
DDP ZIP52 PTSS7
U552.PXSD7
ZIP52 PXSD UN/UN
U557.GTSS1
DDP ZIP80 GTSS1
U557.PTPT7-A
DDP ZIP80 - PP body, PTFE diaphragm, PP seat & PTFE ball
U557.PTSS7
DDP ZIP80 PTSS7
U560.ATSS1
Doublediaphragm ZIP182 AL/TF/SS-SS
U560.ATST1
Doublediaphragm ZIP182 AL/TF/SS-TF
U560.STSS1
Doublediaphragm ZIP182 S/TF/SS-SS
U560.STST1
DDF ZIP182 STST1
Pump
Double Diaphragm Pump UNICA 4:1
502.05.20
Dopag Piston Pump, Rod Metering, Standard
502.05.30
Dopag Piston Pump, Rod Metering, Standard
502.05.40
Dopag Piston Pump, Rod Metering, Standard
502.05.50
Dopag Piston Pump, Rod Metering, Standard
502.05.60
Dopag Piston Pump, Rod Metering, Standard
502.05.80
Dopag Piston Pump, Rod Metering, Standard
502.05.99
Dopag Piston Pump, Rod Metering, Standard
239717
Sensor, flow meter, G3000 & G3000HR
811114
Pneumatic Air Control Valve
100421
4 Way Air Control Valve
100422
4 Way Air Control Valve
100383
4 Way Air Control Valve
100054
4 Way Air Control Valve
108968
4 Way Air Control Valve
400.05.90
Connector Block for Twin Valve, 2 Blind plate
400.05.91
Connector Block for Twin Valve, 1 Blind plate/1 pneum. Solvent Valve
400.05.92
Connector Block for Twin Valve, 2 pneum. Solvent Valve
400.05.93
Connector Block for Twin Valve, 1 Blind plate/1 man. Solvent block
400.05.94
Connector Block for Twin Valve, 2 man. Solvent block
401.05.01
Twin-Valve, for Plastic Mixer, 1 Blind plate/1 pneum. Solvent Valve
401.05.02
Twin-Valve, for Plastic Mixer, 2 pneum. Solvent Valve
401.05.03
Twin-Valve, for Plastic Mixer, 1 Blind plate/1 man. Solvent block
401.05.04
Twin-Valve, for Plastic Mixer, 2 man. Solvent block
401.05.15
Twin-Valve, for Plastic Mixer, EPDM, 2 Blind-Plate
179070
Sprühpistole AA Titan
106082
Pattern Controller
106083
Pattern Controller
Pilot 93-ND
HVLP spray gun model for dispersion adhesives.Gun body TEFLON®-coated for ease of cleaning.All wetted parts made of stainless steel.Weight: 440 g.Wide-to-round jet nozzle insert, sizes available:0.5,0.8,1.0,1.2,1.4,1.5,1.8 /2.0,2.2,2.5 mm ø
V1163203
HVLP spray gun model for dispersion adhesives.Gun body TEFLON®-coated for ease of cleaning.All wetted parts made of stainless steel.Weight: 440 g.Wide-to-round jet nozzle insert, sizes available:0.5,0.8,1.0,1.2,1.4,1.5,1.8 /2.0,2.2,2.5 mm ø
106365
Valve Driver