Case 1 - Window Manufacturer (Insulated Glass)

Type of User:

Window Manufacturer, (Insulated Glass) typical of all IG (Insulated Glass) producers

Application:

Manually applying 2K Polysulfide Sealant to the edges of insulated glass for the secondary seal

Material Used:

2 Component Polysulfide Sealant,  10:1 Ratio

Equipment/Solution:

The equipment is dependent upon the material’s physical characteristics. In this case, the Polysulfide Sealant material is 10:1 ratio, A to B. It is a very thick material, in excess of 1,000,000 centipoise on each of the A and B components.  A 55-gallon open head drum for the base material and a 5-gallon pail for the catalyst supply the material.

The equipment used is a configured Hydra-Mate or Visco-Mix Proportioning System that includes the following:

1 – Two Component proportioning unit with a Master / Slave Pumping system.
1 – 5 gallon ram for the catalyst feed.
1 – Flex mix gun kit that includes the flex mixer (or Tri-Core mixer), Ultra-Lite gun with mixer in
      the handle, injector valve, catalyst bypass valve and necessary fittings.
1 – Boom kit with hoses for overhead suspension of hoses
1 -  Ratio check kit
All hoses, fittings and pneumatic controls